Skip to the content
2 layers76.7 × 58.2 mmRom reader, the printed circuit board in 3D

Postal Pico ROM Reader

Size
76.7 × 58.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
58
Pads
161
Tracks, vias
232, 54
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 Jan 2023
Updated
1 Jun 2023

Overview

Rom reader is an open-source printed circuit board by blackjetrock, from the blackjetrock/postal-pico-rom-reader repository on GitHub. It is a 2-layer board of 76.7 × 58.2 mm with 25 parts on 58 nets, routed with 232 tracks and 54 vias.

Its parts include 22 resistors, 2 ICs and 1 connector. It belongs with the RP2040 boards of this library.

README

README.md

Postal Pico ROM Reader

This is a ROM reader that is designed to be an easy to use, simple ROM dumping tool. It should be possible to send the dumper to someone in the post, have them plug a ROM in and get a dump of that ROM stored in the device flash. The device can then optionally dump more ROMs and then be sent back to the person who wants the dumps. The dumps are then extracted from the device flash.

*** NOTE: Make sure pin 1 of the ROM is correctly aligned with pin 1 on the socket when inserting it ***

The dumper can also dump ROM contents to the USB port it is powered by.

Hardware

The dumper is basically just a Pico attached to a ROM socket with serial resistors. It is making use of the possible/probably 5V tolerance of its GPIO lines-*-. The control signals are attached through low value resistors as they drive the ROM and aren't subject to 5V. The data lines are 5V and come into the Pico though cowardly 28K resistors.

Firmware

The firmware uses the USB serial port for interactions with the user. It uses the flash of the Pico for firmware and also has configuration data stored in part of the flash. ROM dumps stored in several 'slots' of 16K each so an external non-volatile device isn't needed. the USB serial has a menu system that can be entered at boot-up and used to set the non-volatile configuration data that determines how the dumper will work. Slots can be cleared etc and data dumped from the menu system.

The dumper can be set up to dump to USB or dump data to a flash slot using the configuration menu. When dumping to a slot the data is also dumped to USB. Once all slots are full the dumper will not over-write any slots with new dumps, but the device can still be used as a dumper with a USB data dump.

To delete the slots a menu option is used, and several hoops have to be jumped through.

There are a couple of counters that count the number of USB dumps that the dumper has taken and the number of slot dumps it has performed.

-*-I saw a post on the internet, which if it really is by Eben Upton, says that the Pico GPIOs are 5V tolerant, but not 5V5 tolerant as inputs.

See here:

https://hackaday.com/2022/09/25/pi-pico-w-does-pcmcia-gets-this-ibm-pc110-online/#comment-6516402

Parts

25
QtyValueFootprintReferences
22R_SmallResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22 +6
12364Package_DIP:DIP-24_W15.24mmU1
1Conn_01x03_FemaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1Picorp2040:RPi_Pico_SMD_THU2

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Rom reader PCB?

It measures 76.7 × 58.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rom reader use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rom reader KiCad files?

From the blackjetrock/postal-pico-rom-reader repository on GitHub, at the commit this page was made from: the board is pcb/rom-reader/rom-reader.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rom reader design in my own project?

Its repository states no licence, so its author keeps all rights: ask blackjetrock before reusing the design.