4 layers50 × 65 mm
FeroFlyF405
Ozonised/FeroFlyF405
FeroFlyF405 an open source STM32F405 based flight controller running INAV
150 parts44CERN-OHL-P-2.0
2 layers47 × 33 mm
Airboard
blaab2/airboard- Size
- 47 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 36
- Pads
- 88
- Tracks, vias
- 77, 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Jan 2026
- Updated
- 5 Jan 2026
Overview
Airboard is an open-source printed circuit board by blaab2, from the blaab2/airboard repository on GitHub. It is a 2-layer board of 47 × 33 mm with 10 parts on 36 nets, routed with 77 tracks and 4 vias.
It is built around the ESP32-C3-WROOM-02-H4 and DPS368. Its parts include 5 resistors, 2 ICs, 1 capacitor, 1 diode and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0603_R_560112116017 | Resistor_SMD_Wurth:R_Wurth_WRIS-RSKS-0603_R | R2, R3 |
| 2 | 0603_R_560112116043 | Resistor_SMD_Wurth:R_Wurth_WRIS-RSKS-0603_R | R4, R5 |
| 1 | 0402_560112110012 | Resistor_SMD_Wurth:R_Wurth_WRIS-RSKS-0402 | R1 |
| 1 | 0603_Fl0.35_R_885012106031 | Capacitor_SMD_Wurth:C_Wurth_WCAP-CSGP-0603_Fl0.35_R | C1 |
| 1 | DPS368 | DPS368:LGA8S145X65P2X4_200X250X110-V | U2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Eagle_WR-USB (rev25c):629722000214 | J2 |
| 1 | WE-TVS-SS_DFN1210-6L_824012823 | WE-TVS-SS_DFN1210-6L_824012823:WE-TVS_DFN1210-6L | D1 |
Questions
How big is the Airboard PCB?
It measures 47 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Airboard use?
10 parts, built around the ESP32-C3-WROOM-02-H4 and DPS368. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Airboard KiCad files?
From the blaab2/airboard repository on GitHub, at the commit this page was made from: the board is kicad_project/airboard/airboard.kicad_pcb and its schematic kicad_project/airboard/airboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Airboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask blaab2 before reusing the design.
Similar boards
- 6 layers100 × 37 mm
PickleRick
icl-rocketry/Ricardo-PickleRick
A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.
223 parts2MIT - 4 layers33 × 26 mm
- 2 layers100 × 100 mm
- 4 layers60.7 × 40 mm
Ricardo Crosshair
icl-rocketry/Ricardo-Crosshair
Reefing plastic fibre line cutter (recovery) board.
169 parts - 2 layers60 × 77.7 mm
- 4 layers70 × 70 mm
Windsensor
kristofkatzenberger/windsensor
This repository contains the design files for a portable wind sensor developed in 2025/26 at the University of Applied Sciences Technikum Wien. This project was completed as part of the Bachelor's Thesis:
128 partsMIT - 6 layers26 × 56.8 mm
Bluebuzz rm2
sequoia-hope/bluebuzz
A Bluetooth vibrator controller: RP2350A + Raspberry Pi Radio Module 2 (the first board, an nRF52840 module, is abandoned and kept in archive/nrf52840/): Wi-Fi 4 and Bluetooth 5.2 Classic + LE (CYW43439), so the toy can…
109 parts