2 layers225 × 356.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
103 parts1.3k
2 layers38.1 × 63.5 mm
Photo-Acoustic Sensing Capstone Project
- Size
- 38.1 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 65
- Pads
- 266
- Tracks, vias
- 1,057, 46
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 9 Nov 2015
- Updated
- 6 May 2016
Overview
ADC is an open-source printed circuit board by bitbyt3r, from the bitbyt3r/Capstone repository on GitHub. It is a 2-layer board of 38.1 × 63.5 mm with 103 parts on 65 nets, routed with 1,057 tracks and 46 vias.
It is built around the AK5703EN. Its parts include 41 capacitors, 41 resistors, 9 diodes, 6 ICs and 2 connectors.
Main components
1Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1k | Resistors_SMD:R_0603_HandSoldering | R1, R9, R10, R18, R19, R23, R35, R36, R38, R40 |
| 9 | 1u | Capacitors_SMD:C_0603_HandSoldering | C6, C17, C33, C34, C35, C36, C37, C38, C40 |
| 9 | D_Schottky | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D1, D2, D3, D3, D4, D5, D6, D7, D8 |
| 8 | 100k | Resistors_SMD:R_0603_HandSoldering | R5, R6, R12, R13, R21, R22, R25, R26 |
| 8 | 10u | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C9, C13, C19, C20, C27, C28 |
| 4 | 0.1u | Capacitors_SMD:C_0603_HandSoldering | C15, C18, C39, C41 |
| 4 | 100n | Capacitors_SMD:C_0603_HandSoldering | C5, C11, C23, C24 |
| 4 | 15k | Resistors_SMD:R_0603_HandSoldering | R3, R14, R27, R28 |
| 4 | 180p | Capacitors_SMD:C_0603_HandSoldering | C8, C16, C31, C32 |
| 4 | 18k | Resistors_SMD:R_0603_HandSoldering | R4, R15, R29, R30 |
| 4 | 2.2k | Resistors_SMD:R_0603_HandSoldering | R2, R11, R20, R24 |
| 4 | 2.2u | Capacitors_SMD:C_0603_HandSoldering | C4, C12, C25, C26 |
| 4 | 3.3u | Capacitors_SMD:C_0603_HandSoldering | C7, C14, C29, C30 |
| 4 | 4.7u | Capacitors_SMD:C_0603_HandSoldering | C3, C10, C21, C22 |
| 4 | 820 | Resistors_SMD:R_0603_HandSoldering | R7, R16, R31, R32 |
| 4 | 82k | Resistors_SMD:R_0603_HandSoldering | R8, R17, R33, R34 |
| 3 | 10k | Resistors_SMD:R_0603_HandSoldering | R37, R39, R41 |
| 1 | AK5703 | Housings_DFN_QFN:QFN-28-1EP_4x4mm_Pitch0.4mm | U6 |
| 1 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05 | P1 |
| 1 | CONN_02X08 | Pin_Headers:Pin_Header_Straight_2x08 | P2 |
| 1 | MICA | Buzzers_Beepers:MagneticBuzzer_Kingstate_KCG0601 | U1 |
| 1 | MICB | Buzzers_Beepers:MagneticBuzzer_Kingstate_KCG0601 | U2 |
| 1 | MICC | Buzzers_Beepers:MagneticBuzzer_Kingstate_KCG0601 | U4 |
| 1 | MICD | Buzzers_Beepers:MagneticBuzzer_Kingstate_KCG0601 | U5 |
| 1 | TL074 | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U3 |
The 99 most common of 103 parts.
Questions
How big is the ADC PCB?
It measures 38.1 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ADC use?
103 parts, built around the AK5703EN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADC KiCad files?
From the bitbyt3r/Capstone repository on GitHub, at the commit this page was made from: the board is ADC/ADC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADC design in my own project?
Its repository states no licence, so its author keeps all rights: ask bitbyt3r before reusing the design.
Similar boards
- 2 layers134 × 88 mm
Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 2 layers97 × 69.5 mm
- 2 layers182.8 × 169.2 mm
ErgoMaxLeft
LouWii/ErgoMax
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets
103 parts124 - 2 layers164 × 151 mm
Parametric speaker
Orange-Murker/parametric_speaker
A directional speaker with a driver based on STM32
103 parts103 - 2 layers210.5 × 114.8 mm
Breeze right
afternoonlabs/BreezeKeyboard
Breeze is a split mechanical keyboard with a column-staggered layout. With a focus on productivity, Breeze features a full 6x4 alphanumeric layout, arrow keys, and an extra 6 key cluster for typing and coding.
103 parts83 - 2 layers100 × 100 mm
BulkyMIDI-32 Channel 2
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
103 parts80CC-BY-SA-4.0 - 2 layers309 × 104.1 mm
