Skip to the content
2 layers97.6 × 51.5 mmVibrant, the printed circuit board in 3D

Tectonica by BiT is a research project funded by the European Research Council (ERC) and led by Prof. Ana Tajadura-Jiménez.

Size
97.6 × 51.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
45
Pads
121
Tracks, vias
189, 3
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
4 Jul 2023
Updated
20 Feb 2025

Overview

Vibrant is an open-source printed circuit board by BiT-BTE, from the BiT-BTE/tectonica-haptic-sound-movement repository on GitHub, published under the MIT licence. It is a 2-layer board of 97.6 × 51.5 mm with 35 parts on 45 nets, routed with 189 tracks and 3 vias.

Its parts include 6 resistors, 5 diodes and 1 connector. It belongs with the ESP32 boards of this library.

README

README.md

##Tectonica by BODYinTRANSIT Logo

Tectonica by BiT is a research project funded by the European Research Council (ERC) and led by Prof. Ana Tajadura-Jiménez. The project will run from January 2022 to December 2026 within the Department of Computer Science at Universidad Carlos III de Madrid, Spain.

Objective

The main objective of Tectonica by BODYinTRANSIT is to share our advances in haptic prototypes develoment related with Body Transformation Experience (BTE).

Prototypes

Our prototypes deliver sensory feedback, such as sound, vibrations, mechanical touch, etc. Among them is Tectótica, a series of prototypes dedicated to creating haptic sensory stimulation through various types of actuators.

Publications

Here you can find publications related to the project:

How to contribute

If you are interested in collaborating with the project, please visit our for more information Link.

Contact

For any questions or comments, please contact us at bodyintransit[at]uc3m.es.

University Logo ERC Logo

Parts

35
QtyValueFootprintReferences
6RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4, R5, R6-10K1
51N4007Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1, D2, D3, D4, D5
52N2219Package_TO_SOT_THT:TO-18-3NPN1, NPN2, NPN3, NPN4, NPN5
5CCapacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_HorizontalCAP1, CAP2, CAP3, CAP4, CAP5
5Motor DCConnector_Audio:Jack_3.5mm_Switronic_ST-005-G_horizontalM1, M2, M3, M4, M5
3MountingHole_2.2mm_M2_DIN965MountingHole:MountingHole_2.2mm_M2_DIN965Fast, Fast, Fast
2R_PotentiometerPotentiometer_THT:Potentiometer_ACP_CA9-V10_VerticalRV1-Potencia1, RV2-Velocidad1
1Adafruit_Feather_HUZZAH32_ESP32Module:Adafruit_FeatherBRAIN1
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1_Battery1
1SW_PushConnector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalSW-Mode1
1SW_SPDTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalGP-Switch

Similar boards

  • 2 layers97.2 × 59.1 mmArmLEDsPrototype, the printed circuit board in 3D

    ArmLEDsPrototype

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    35 parts915
  • 2 layers62 × 42 mmMod cell 0 02, the printed circuit board in 3D

    Mod cell 0 02

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    35 parts756
  • 2 layers75 × 26 mmDIY detector electron variant, the printed circuit board in 3D

    DIY detector electron variant

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    35 parts558BSD-2-Clause
  • 2 layers45 × 25 mmReCamera Basically Board, the printed circuit board in 3D

    ReCamera Basically Board

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    35 parts495Apache-2.0
  • 2 layers160.8 × 24.4 mmHUD VID RCD PANEL, the printed circuit board in 3D

    HUD VID RCD PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    35 parts431
  • 2 layers75 × 50 mmBackplane tester, the printed circuit board in 3D

    Backplane tester

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    35 parts397Apache-2.0
  • 2 layers50 × 20.5 mmOtterIron PRO Top, the printed circuit board in 3D

    OtterIron PRO Top

    Jana-Marie/Otter-Iron-PRO

    USB-PD soldering station for JBC C245 handles.

    35 parts321
  • 2 layers50.5 × 67.1 mmHackheld Vega, the printed circuit board in 3D

    Hackheld Vega

    SpacehuhnTech/HackHeld

    Hackable Handheld

    35 parts277

Questions

How big is the Vibrant PCB?

It measures 97.6 × 51.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Vibrant use?

35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vibrant KiCad files?

From the BiT-BTE/tectonica-haptic-sound-movement repository on GitHub, at the commit this page was made from: the board is PCB/vibrant/vibrant.kicad_pcb and its schematic PCB/vibrant/vibrant.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vibrant design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).