
SUMEC MK V
bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.
SUMEC MK V Pro is an open-source printed circuit board by bismarx-v1, from the bismarx-v1/Sumec-MiniSumo-HW repository on GitHub. It is a 4-layer board of 97 × 37.5 mm with 138 parts on 107 nets, routed with 780 tracks and 161 vias.
It is built around the ESP32-S3-WROOM-1-N8, AP62300Z6 and 24CW1280T-I/OT, with the BNO055, USBLC6-2SC6 and XT30PW-M among its other parts. Its parts include 40 resistors, 31 capacitors, 13 connectors, 11 diodes and 9 ICs. It belongs with the ESP32 boards of this library.
SUMEC - is an autonomous MiniSumo robot, that is designed to compete in MiniSumo competitions. MiniSumo robots are small 100mmx100mm autonomous robots that combine electronics, software and mechanics into one project, their task it to push their opponent out of a ring. This project is led and managed by SPŠ na Proseku students.
This GitHub repository contains PCB files, gerber plots and main electronics used by SUMEC MiniSumo robot.
HARDWARE Repository Supervisor:
Project Contributors:
We buy our components from:
If you have any questions, suggestions, or issues regarding this project or repository, please feel free to contact:
We would like to thank Ing. Jaroslav Bušek PhD, for providing contacts and mentoring during the development of this project, and our school SPŠ na Proseku for providing workplace, knowledge, and top-notch equipment.
Sending love from the Czech Republic!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R14, R17, R20, R21, R22, R23, R24, R25, R26, R27, R29, R30, R36, R40 +3 |
| 14 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C6, C7, C8, C13, C15, C18, C21, C24, C28, C30, C31 |
| 12 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13 |
| 9 | LED | LED_SMD:LED_0805_2012Metric | D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 7 | 220R | Resistor_SMD:R_0805_2012Metric | R32, R33, R34, R35, R37, R38, R39 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11, C12, C14, C29 |
| 6 | 22u | Capacitor_SMD:C_0805_2012Metric | C16, C17, C19, C20, C22, C23 |
| 6 | Conn_01x03_Pin | Connector_Molex:Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical | J5, J7, J8, J9, J10, J11 |
| 5 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5 |
| 3 | BOOT | gps-compass_brd:SW_SPST_EVQPE1 | SW4, SW5, SW6 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R11 |
| 2 | 15R | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | 18p | Capacitor_SMD:C_0805_2012Metric | C26, C27 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R4, R31 |
| 2 | 22n | Capacitor_SMD:C_0805_2012Metric | C2, C4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 52.3k | Resistor_SMD:R_0805_2012Metric | R12, R19 |
| 2 | Conn_01x06_Socket | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J2, J3 |
| 2 | DRV8874PWPR | sumec_brd:DRV8874 | U2, U3 |
| 2 | D_Schottky | Diode_SMD:D_1206_3216Metric | D1, D2 |
| 2 | Mounting Hole M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C25 |
| 1 | 2.2u | Inductor_SMD:L_Vishay_IHLP-1212 | L2 |
| 1 | 24CW1280T-I/OT | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | 2m | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 3.3uH | Inductor_SMD:L_Vishay_IHLP-1616 | L1 |
| 1 | 32.768k | gps-compass_brd:CM8V32768TA020125 | Y1 |
| 1 | 45k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | AP62300Z6 | Package_TO_SOT_SMD:SOT-563 | U4 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U7 |
| 1 | Buzzer | Schrack_brd:BUZZER_CUI_CPT | BZ1 |
| 1 | Conn_01x03_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J13 |
| 1 | Conn_01x04_Pin | Connector_Molex:Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical | J6 |
| 1 | Conn_01x06_Pin | Connector_Molex:Molex_PicoBlade_53398-0671_1x06-1MP_P1.25mm_Vertical | J12 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U8 |
| 1 | INA226 | Package_SO:HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.83x1.89mm | U1 |
| 1 | LOGO | sumec_graphic:OWO_IMG | G*** |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | RESET | gps-compass_brd:SW_SPST_EVQPE1 | SW3 |
| 1 | RST | gps-compass_brd:SW_SPST_EVQPE1 | SW2 |
| 1 | SW_DPDT_x2 | sumec_brd:Custom_SPDT_2.5_Switch | SW1 |
| 1 | TPS565242DRLR | Package_TO_SOT_SMD:SOT-563 | U5 |
| 1 | TestPoint | sumec_graphic:SUMEC_LOGO_IMG | TP3 |
| 1 | TestPoint | sumec_graphic:SUMEC_QR_IMG | TP1 |
| 1 | TestPoint | sumec_graphic:SPS_LOGO_IMG | TP2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:TSOT-23-6 | U6 |
| 1 | USB_C | sumec_brd:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | XT30PW-M | sumec_brd:XT30PW-M | J1 |

bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.


bismarx-v1/GPS-Compass
The compass that doesnt point to north, but it points to a GPS location, or a list of locations and points to the nearest one


theBrutzler/U-Bootloader
Learnin PCB with many Sensors. Made in Twitchstream. SUB Tember board!

bismarx-v1/Sumec-MiniSumo
OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master

JohnanLuca02/BYTE_Electronics
Repository for everything concerning the electronics (PCB, Electrical schemes, BOM, ...) of the robot dog project of the AiTeam called BYTE.

Gupatron/Gupsfirstpcb
This is the first pcb that I will manufacture and intend to use for teleop usecases in my personal projects.

Sphyrna-029/Pico-Pilot
A simple auto pilot for land/water based robots based on the Raspberry Pi rp2350B/2354B
It measures 97 × 37.5 mm and has 4 copper layers, 1.6 mm thick.
138 parts, built around the ESP32-S3-WROOM-1-N8, AP62300Z6, 24CW1280T-I/OT and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bismarx-v1/Sumec-MiniSumo-HW repository on GitHub, at the commit this page was made from: the board is main_hw/SUMEC_MK_V_Pro/SUMEC_MK_V_Pro.kicad_pcb and its schematic main_hw/BACK_QRE/BACK_QRE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bismarx-v1 before reusing the design.