Skip to the content
4 layers119.5 × 93.5 mmSchrackCounterPrototype, the printed circuit board in 3D

SchrackCounterPrototype

bismarx-v1/SchrackProjects2

SPS na Proseku repo for SchrackTechink projects.

Size
119.5 × 93.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
26
Nets
45
Pads
105
Tracks, vias
121, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
17 Aug 2024
Updated
19 Aug 2026

Overview

SchrackCounterPrototype is an open-source printed circuit board by bismarx-v1, from the bismarx-v1/SchrackProjects repository on GitHub. It is a 4-layer board of 119.5 × 93.5 mm with 26 parts on 45 nets, routed with 121 tracks and 0 vias.

It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 12 resistors, 3 capacitors, 3 diodes, 3 switches and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

SchrackProjects

SPS na Proseku repo for SchrackTechink projects.

Parts

26
QtyValueFootprintReferences
50RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8, R9, R10, R11, R12
310kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5, R6, R7
3220RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3
3LEDLED_THT:LED_D5.0mmD1, D2, D3
2100nFCapacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mmC1, C3
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW2, SW3
110uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1BatterySchrack_brd:SOLDER_PADSBT1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1ESP32-S3-DevKitCPCM_Espressif:ESP32-S3-DevKitCU1
1SW_PushSchrack_brd:SOLDER_PADSSW1

More from bismarx-v1/SchrackProjects

3
  • 2 layers230 × 100 mmShrackThingy, the printed circuit board in 3D

    ShrackThingy

    bismarx-v1/SchrackProjects

    SPS na Proseku repo for SchrackTechink projects.

    159 parts2
  • 4 layers140 × 60 mmSchrackMulticlock, the printed circuit board in 3D

    SchrackMulticlock

    bismarx-v1/SchrackProjects

    SPS na Proseku repo for SchrackTechink projects.

    83 parts2
  • 4 layers98.5 × 88.5 mmSchrackCounter, the printed circuit board in 3D

    SchrackCounter

    bismarx-v1/SchrackProjects

    SPS na Proseku repo for SchrackTechink projects.

    77 parts2

Similar boards

  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers129.9 × 63.6 mmTraeger rev 2.3.0.kicad pro, the printed circuit board in 3D

    Traeger rev 2.3.0.kicad pro

    jazzmonger/Traeger-PID-Controller

    Traeger Smoker/Grill Controller based on an

    45 parts36
  • 2 layers168.8 × 78.9 mmGameboy3, the printed circuit board in 3D

    Gameboy3

    ohasanov-hbrw/tribit32-advanced

    A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!

    61 parts8
  • 2 layers134.6 × 49.5 mmMem esp, the printed circuit board in 3D

    Mem esp

    fread/visvitalis

    A very simple modular relay computer

    71 parts7
  • 2 layers90 × 102 mmPL Toon, the printed circuit board in 3D

    PL Toon

    pl-toon/pl-toon-codes

    PL-TOON material

    39 parts7
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6
  • 2 layers76.2 × 40.6 mmEspressifESP32toExpressAdaptor, the printed circuit board in 3D

    EspressifESP32toExpressAdaptor

    dnhutchins/ETC_Express_Reverse_Eng

    The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.

    3 parts5
  • 2 layersE ink multi sensor, the printed circuit board in 3D

    E ink multi sensor

    heckler/esphome-device-configs

    Configuration definitions for local ESPHome files

    11 parts4Apache-2.0

Questions

How big is the SchrackCounterPrototype PCB?

It measures 119.5 × 93.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the SchrackCounterPrototype use?

26 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SchrackCounterPrototype KiCad files?

From the bismarx-v1/SchrackProjects repository on GitHub, at the commit this page was made from: the board is SchrackCounter/PCB/SchrackCounterPrototype/SchrackCounterPrototype.kicad_pcb and its schematic SchrackCounter/PCB/SchrackCounter/CONNECTIVITY.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SchrackCounterPrototype design in my own project?

Its repository states no licence, so its author keeps all rights: ask bismarx-v1 before reusing the design.