
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

Progetto dispositivo neonataler per il monitoraggio della respirazione
Dispositivo Resp is an open-source printed circuit board by bioimedpellegrino, from the bioimedpellegrino/breath-u repository on GitHub. It is a 2-layer board of 83 × 50 mm with 11 parts on 34 nets, routed with 103 tracks and 0 vias.
It is built around the ATMEGA328P-PU. Its parts include 2 capacitors, 2 resistors, 2 ICs, 2 diodes and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This experimental thesis focuses on the design, implementation, and testing of a low-cost device intended for monitoring the vital functions of the wearer. The idea behind this device was conceived to offer parents greater control over their infants during the first year of life, with the aim of preventing unexpected deaths such as:
In these cases, immediate detection of danger is critical to saving the infant's life and avoiding permanent brain damage.
Although the percentage of such deaths is fortunately very low, it is essential that parents have access to an affordable and highly reliable embedded system.
This thesis will analyze the various stages involved in the development of the device, including:
The entire process is described from an engineering perspective, ensuring a comprehensive understanding of the project's development.
The primary objective of this work is to create a cost-effective and dependable system that allows real-time monitoring of an infant’s vital signs, contributing to the reduction of preventable infant deaths. The approach combines careful sensor selection and system design to ensure both practicality and efficiency.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 2 | 22nF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2 |
| 1 | 16.00Mhz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 3.3V | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | BT1 |
| 1 | ATmega328P-PU | ATMEGA328-PU:DIL28 | U1 |
| 1 | BLUE | LED_THT:LED_D3.0mm | D2 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J1 |
| 1 | GY-521 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | U2 |
| 1 | RED | LED_THT:LED_D3.0mm | D1 |

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 83 × 50 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bioimedpellegrino/breath-u repository on GitHub, at the commit this page was made from: the board is Dispositivo_Resp/Dispositivo_Resp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bioimedpellegrino before reusing the design.