Skip to the content
2 layers83 × 50 mmDispositivo Resp, the printed circuit board in 3D

Progetto dispositivo neonataler per il monitoraggio della respirazione

Size
83 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
34
Pads
58
Tracks, vias
103, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Aug 2024
Updated
21 Aug 2024

Overview

Dispositivo Resp is an open-source printed circuit board by bioimedpellegrino, from the bioimedpellegrino/breath-u repository on GitHub. It is a 2-layer board of 83 × 50 mm with 11 parts on 34 nets, routed with 103 tracks and 0 vias.

It is built around the ATMEGA328P-PU. Its parts include 2 capacitors, 2 resistors, 2 ICs, 2 diodes and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Low-Cost Vital Monitoring Device for Infants

Overview

This experimental thesis focuses on the design, implementation, and testing of a low-cost device intended for monitoring the vital functions of the wearer. The idea behind this device was conceived to offer parents greater control over their infants during the first year of life, with the aim of preventing unexpected deaths such as:

  • Accidental suffocation,
  • Positional asphyxia,
  • Choking due to inhalation or regurgitation,
  • And unexplained incidents like Sudden Infant Death Syndrome (SIDS).

In these cases, immediate detection of danger is critical to saving the infant's life and avoiding permanent brain damage.

Although the percentage of such deaths is fortunately very low, it is essential that parents have access to an affordable and highly reliable embedded system.

Scope of the Thesis

This thesis will analyze the various stages involved in the development of the device, including:

  • Conceptualization and design,
  • Selection and application of sensors,
  • Preliminary testing,
  • Final experimentation.

The entire process is described from an engineering perspective, ensuring a comprehensive understanding of the project's development.

Objectives

The primary objective of this work is to create a cost-effective and dependable system that allows real-time monitoring of an infant’s vital signs, contributing to the reduction of preventable infant deaths. The approach combines careful sensor selection and system design to ensure both practicality and efficiency.

Parts

11
QtyValueFootprintReferences
2220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4
222nFCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC1, C2
116.00MhzCrystal:Crystal_HC18-U_VerticalY1
13.3VConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_HorizontalBT1
1ATmega328P-PUATMEGA328-PU:DIL28U1
1BLUELED_THT:LED_D3.0mmD2
1Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_HorizontalJ1
1GY-521Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_HorizontalU2
1REDLED_THT:LED_D3.0mmD1

Similar boards

  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers76.3 × 122.8 mmDiscipad pcb, the printed circuit board in 3D

    Discipad pcb

    coseyfannitutti/discipad

    17-key numpad assembled with only through hole components, including usb type-c

    63 parts221GPL-3.0
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers247.6 × 99.2 mmRomeo pcb, the printed circuit board in 3D

    Romeo pcb

    coseyfannitutti/romeo

    Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

    138 parts148GPL-3.0
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    70 parts137
  • 2 layers238.1 × 375.5 mmFramework, the printed circuit board in 3D

    Framework

    stevennguyen/framework

    Ortholinear keyboard with a knob

    197 parts131
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers145.3 × 44.5 mmScout, the printed circuit board in 3D

    Scout

    oskitone/scout

    3D-printed, Arduino-compatible, 17-key mono synth. Squeeeee!

    48 parts114

Questions

How big is the Dispositivo Resp PCB?

It measures 83 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dispositivo Resp use?

11 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dispositivo Resp KiCad files?

From the bioimedpellegrino/breath-u repository on GitHub, at the commit this page was made from: the board is Dispositivo_Resp/Dispositivo_Resp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dispositivo Resp design in my own project?

Its repository states no licence, so its author keeps all rights: ask bioimedpellegrino before reusing the design.