
LightStick AM2520SEC03-Panel
Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Open source tools for scientific inquiry and exploration!
BTN MiniSpec is an open-source printed circuit board by Binomica-Labs, from the Binomica-Labs/Hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 66 × 66 mm with 21 parts on 19 nets, routed with 150 tracks and 0 vias.
It is built around the LM3914 and TEPT5700. Its parts include 4 resistors, 1 IC, 1 diode and 1 transistor.
Open source tools for scientific inquiry and exploration!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED | LED_THT:LED_D3.0mm | GRN, RED, RED, RED, RED, YLW, YLW, YLW, YLW, YLW |
| 3 | 10K | SamacSys_Parts:RV100F304K1B100K | VR1, VR2, VR3 |
| 1 | 100R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 2K2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 3K3 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | PWR |
| 1 | LED | LED_THT:LED_D5.0mm | D11 |
| 1 | LM3914 | SamacSys_Parts:DIP794W56P254L2286H533Q18N | IC1 |
| 1 | TEPT5700 | SamacSys_Parts:TEPT5700 | Q1 |

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!

yorkrobotlab/openkilo
OpenKilo: A truly open-source Kilobot design revision that aids repair and extensibility


kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome

GemsErasmusPlus/GEMS_Electronics
electronics design for the GEMS educational hardware


njKessel/ESP32s3-NetworkClock
ESP32-S3 smart clock with LED display, weather, moon phase, temperature, Google Calendar

cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.

It measures 66 × 66 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the LM3914 and TEPT5700. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Binomica-Labs/Hardware repository on GitHub, at the commit this page was made from: the board is BTN-MiniSpec/BTN-MiniSpec.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).