Skip to the content
2 layers20 × 25 mmTouchSense r1, the printed circuit board in 3D

KiCad project files for my UCF CECS senior design project

Size
20 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
11
Pads
38
Tracks, vias
139, 5
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
23 Apr 2018
Updated
17 Jun 2018

Overview

TouchSense r1 is an open-source printed circuit board by bin2ai, from the bin2ai/Senior_Design repository on GitHub. It is a 2-layer board of 20 × 25 mm with 14 parts on 11 nets, routed with 139 tracks and 5 vias.

Its parts include 5 connectors, 3 capacitors, 3 resistors, 1 IC and 1 diode.

Parts

14
QtyValueFootprintReferences
21KResistors_SMD:R_0603R1, R2
2GS2Connectors:GS2J2, J3
10.1uFCapacitors_SMD:C_0603C1
110KResistors_SMD:R_0603R3
14.7nFCapacitors_SMD:C_0603C2
15pFCapacitors_SMD:C_0603C3
1AT42QT1010-TSHRTO_SOT_Packages_SMD:SOT-23-6U1
1GS3Connectors:GS3GS1
1Hatched_FillseniorDesign:HATCHED_FILL_10mmJ101
1LEDLEDs:LED_0805D1
1breakoutPin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ1
1cap/daisyPin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ4

More from bin2ai/Senior_Design

3
  • 2 layers100 × 100 mmSenior Design, the printed circuit board in 3D

    Senior Design

    bin2ai/Senior_Design

    KiCad project files for my UCF CECS senior design project

    165 parts
  • 2 layers100 × 100 mmTouchSense, the printed circuit board in 3D

    TouchSense

    bin2ai/Senior_Design

    KiCad project files for my UCF CECS senior design project

    21 parts

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the TouchSense r1 PCB?

It measures 20 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TouchSense r1 use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TouchSense r1 KiCad files?

From the bin2ai/Senior_Design repository on GitHub, at the commit this page was made from: the board is touchSense_r1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TouchSense r1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask bin2ai before reusing the design.