Skip to the content
2 layers46 × 78 mmPocket console keychain, the printed circuit board in 3D

Pocket console keychain

Billdesj/lightning-bolt-keychain

A USB-C powered light-up PCB keychain shaped like a chunky lightning bolt. Plug it into a USB-C charger, power bank, or powered port and the amber LEDs light the bolt.

Size
46 × 78 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
10
Pads
37
Tracks, vias
39, 5
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
27 Jul 2026
Updated
27 Jul 2026

Overview

Pocket console keychain is an open-source printed circuit board by Billdesj, from the Billdesj/lightning-bolt-keychain repository on GitHub, published under the MIT licence. It is a 2-layer board of 46 × 78 mm with 15 parts on 10 nets, routed with 39 tracks and 5 vias.

Its parts include 5 resistors, 5 diodes, 1 connector and 1 fuse.

README

README.md

USB-C Lightning Bolt PCB Keychain

A USB-C powered light-up PCB keychain shaped like a chunky lightning bolt. Plug it into a USB-C charger, power bank, or powered port and the amber LEDs light the bolt.

Design

  • USB-C power-only input, 5 V VBUS
  • Correct USB-C sink detection with 5.1k pull-downs on CC1 and CC2
  • 500 mA resettable fuse footprint on VBUS
  • Five amber 0603 LEDs arranged down the lightning bolt
  • One 1k current-limit resistor per LED branch
  • Matte black solder mask with ENIG finish recommended
  • Reinforced plated keyring hole
  • Flat bottom edge for the USB-C receptacle

Electrical Design

text
USB-C VBUS -> F1 polyfuse -> VLED
CC1 -> 5.1k -> GND
CC2 -> 5.1k -> GND
VLED -> 1k resistor -> amber LED -> GND  (five branches)

The board is intentionally power-only. It does not route USB data. The CC pull-down resistors are what make a USB-C source provide default 5 V to the board.

Files

  • hardware/lightning-bolt-keychain.kicad_pro - KiCad project file
  • hardware/lightning-bolt-keychain.kicad_sch - USB-C powered schematic
  • hardware/lightning-bolt-keychain.kicad_pcb - lightning-bolt PCB layout
  • bom/lightning-bolt-keychain-bom.csv - parts list
  • fabrication/fab-notes.md - PCB fab and assembly notes
  • fabrication/lightning-bolt-keychain-fab-package.zip - Gerber, drill, BOM, and validation reports

Build Notes

  • Use a USB-C power-only receptacle matching the KiCad footprint, currently GCT USB4125 family.
  • Use 5.1k 0603 resistors for RCC1 and RCC2; these are required for USB-C power input.
  • Start with 1k LED resistors for gentle brightness from USB 5 V. Lower values such as 680 ohm are brighter; higher values such as 1.5k or 2.2k are softer.
  • Confirm the USB-C connector orientation before ordering boards.

Fab Readiness

  • KiCad ERC: 0 violations
  • KiCad DRC: 0 violations, 0 unconnected items
  • Gerbers and drill files are exported under fabrication/
  • Upload fabrication/lightning-bolt-keychain-fab-package.zip to a PCB fab for quoting

Visual Direction

Recommended finish:

  • PCB: matte black solder mask
  • Copper finish: ENIG / gold
  • LEDs: amber / warm yellow
  • Thickness: 1.6 mm

Keep the bolt chunky. Thin points look cool in renders but keychains get abused.

Parts

15
QtyValueFootprintReferences
51kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5
5AmberLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5
25.1kResistor_SMD:R_0603_1608MetricRCC1, RCC2
1500mAFuse:Fuse_1206_3216MetricF1
1KeyringMountingHole:MountingHole_4.3mm_M4_Pad_ViaH1
1USB-C PowerConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_HorizontalJ1

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Pocket console keychain PCB?

It measures 46 × 78 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pocket console keychain use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pocket console keychain KiCad files?

From the Billdesj/lightning-bolt-keychain repository on GitHub, at the commit this page was made from: the board is hardware/pocket-console-keychain.kicad_pcb and its schematic hardware/lightning-bolt-keychain.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pocket console keychain design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).