
Teliko
BillBanakos/Projects
This is a repository of the projects i have done in my unveristy years

This is a repository of the projects i have done in my unveristy years
Ampaudio is an open-source printed circuit board by BillBanakos, from the BillBanakos/Projects repository on GitHub. It is a 2-layer board of 105.5 × 66.5 mm with 26 parts on 23 nets, routed with 150 tracks and 2 vias.
It is built around the LM386. Its parts include 9 capacitors, 5 connectors, 4 resistors, 1 IC and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C7 |
| 1 | 0.1u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 100u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 10K LIN | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV3 |
| 1 | 10K LOG | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | 10u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1K LIN | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV2 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 33N | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 40 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C6 |
| 1 | 470u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3 |
| 1 | AudioJack2 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J1 |
| 1 | AudioJack2_SwitchT | Connector_Audio:Jack_6.35mm_Neutrik_NMJ4HCD2_Horizontal | J2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | Conn_01x02_Pin | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J5 |
| 1 | LM386 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | NJFET | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_NKK_G1xJP | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |

BillBanakos/Projects
This is a repository of the projects i have done in my unveristy years

BillBanakos/Projects
This is a repository of the projects i have done in my unveristy years

BillBanakos/Projects
This is a repository of the projects i have done in my unveristy years

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO


oskitone/poly555
The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.


It measures 105.5 × 66.5 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the LM386. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BillBanakos/Projects repository on GitHub, at the commit this page was made from: the board is LM386_with_CS_preamp_stage_Kicad/ampaudio.kicad_pcb and its schematic LM386_with_CS_preamp_stage_Kicad/ampaudio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BillBanakos before reusing the design.