Skip to the content
2 layers17.5 × 20.5 mm3pdt board, the printed circuit board in 3D

A 3PDT PCB for guitar pedals

Size
17.5 × 20.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
7
Pads
15
Tracks, vias
20, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
1 Mar 2025
Updated
22 Apr 2025

Overview

3pdt board is an open-source printed circuit board by bijan-dev, from the bijan-dev/KiCad-3PDT-PCB-project repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 17.5 × 20.5 mm with 7 parts on 7 nets, routed with 20 tracks and 0 vias.

It belongs with the audio and music boards of this library.

README

README.md

KiCad-3PDT-PCB-project

A 3PDT PCB for guitar pedals

Hello, this is a KiCad project for a 3PDT PCB board. This will allow a guitar pedal with a 3PDT like this to be wired in true bypass.

  • JI = Input Jack
  • IN = PCB Input
  • LED = LED connection (assumes an offboard current limiting resistor eg. 4.7k Ohm. Please add one if your effect PCB doesn't have one)
  • GND = Ground connection
  • OUT = PCB Output
  • JO = Output Jack

The wire pads have a pitch of 2.54mm (0.1") to match that of common ribbon cables.

Board width is 17.5mm, height is 20.5mm.

Huge thank you to Mad Bean for the pad and 3PDT footprints, their footprint library is the GOAT.


This board is now verified! I ordered some copies from OshPark, and used one in a new build. It works! It's suprisingly tiny!


If you would like to order one

The gerber files are included in the repo.

Click into the 3pdt_pcb_fab_files.zip file in this repo, then download that zip file.

Then you can use a board fabricator like JLCPCB and upload that zip onto their site.

If you need the gerber files compressed in a different format than .zip, I've included them in the folder 3pdt_pcb_fab_files.

Here's where to put the file on JLCPCBs website:

Once you drag the .zip onto there, it'll load this page with the PCB, and lots of options for it. You can click "PCB Qty" to change the number of boards to get. I usually leave everything else default, except for Surface Finish - LeadFree HASL (personal preference).

Other PCB fab sites should work very similarly.


Here's screenshots of the schematic and PCB layout:

Parts

7
QtyValueFootprintReferences
1GND_MB_supply_pins:PAD1GND1
1IN_MB_supply_pins:PAD1IN1
1JI_MB_supply_pins:PAD1JI1
1JO_MB_supply_pins:PAD1JO1
1LED_MB_supply_pins:PAD1LED1
1OUT_MB_supply_pins:PAD1OUT1
1~_MB_switches:3PDT.LUGS.KR.NO_CIRCLESW_3PDT1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the 3pdt board PCB?

It measures 17.5 × 20.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 3pdt board use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 3pdt board KiCad files?

From the bijan-dev/KiCad-3PDT-PCB-project repository on GitHub, at the commit this page was made from: the board is KiCad_project_files/3pdt board.kicad_pcb and its schematic KiCad_project_files/3pdt board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 3pdt board design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).