Skip to the content
2 layers60.3 × 36.8 mmBlinds, the printed circuit board in 3D

This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

Size
60.3 × 36.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
55
Pads
226
Tracks, vias
247, 69
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Oct 2020
Updated
28 Jul 2025

Overview

Blinds is an open-source printed circuit board by bgerp, from the bgerp/ztm_doc repository on GitHub. It is a 2-layer board of 60.3 × 36.8 mm with 53 parts on 55 nets, routed with 247 tracks and 69 vias.

It is built around the SN65HVD10QDREP, 1N4148W and BC847. Its parts include 27 capacitors, 4 connectors, 4 switches, 3 ICs and 3 inductors. It belongs with the nRF52 and nRF5x boards of this library.

Main components

3

README

README.md

Zontromat - Zonal Electronic Automation

Introduction

This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes:

  • Electrical schematics and sheets.
  • Electronic schematics and sheets.
  • Thermal and hydro schematics and sheets.
  • Flows, diagrams, and charts of the process control.

This repository is not licensed by single license. Every single project in it is licensed separately, as separate material.

Limitations

  • Every project described in this repository have its own license and terms of use, reproduce, distribution and redistribution.

Contribution

  • Contribution is permitted by the owner of the project by request from the contributor.

Parts

53
QtyValueFootprintReferences
10100nFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5, C6, C13, C14, C15, C23
4100nFCapacitor_SMD:C_0402_1005MetricC17, C20, C24, C25
412pFCapacitor_SMD:C_0402_1005MetricC11, C12, C21, C22
422nFCapacitor_SMD:C_0603_1608MetricC7, C8, C9, C10
4SW_PushButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1, SW2, SW3, SW4
3FiducialFiducial:Fiducial_0.5mm_Mask1mmFID1, FID2, FID3
10.8pFCapacitor_SMD:C_0402_1005MetricC18
1100pFCapacitor_SMD:C_0402_1005MetricC19
110uHCapacitor_SMD:C_0603_1608MetricL3
11N4007Diode_SMD:D_SMAD1
11N4148WDiode_SMD:D_SOD-123D2
11pFCapacitor_SMD:C_0402_1005MetricC26
11uFCapacitor_SMD:C_0603_1608MetricC16
12.2nHCapacitor_SMD:C_0402_1005MetricL2
1220uFCapacitor_SMD:CP_Elec_6.3x7.7C28
13.9nHResistor_SMD:R_0402_1005MetricL1
132768HzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY2
14.7KResistor_SMD:R_0603_1608MetricR2
1AZ1117-3.3Package_TO_SOT_SMD:SOT-89-3_HandsolderingU1
1Antenna_ShieldRF_Antenna:Texas_SWRA117D_2.4GHz_LeftAE1
1BC847Package_TO_SOT_SMD:SOT-23Q1
1BuzzerBuzzer_Beeper:MagneticBuzzer_Kingstate_KCG0601BZ1
1COMConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Crystal_GND24_SmallCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY1
1MAX14870Package_DFN_QFN:DFN-12-1EP_3x3mm_P0.45mm_EP1.66x2.38mmM1
1MOTORConnector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_VerticalJ3
1POWERConnector_BarrelJack:BarrelJack_HorizontalJ1
1PRGConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1SN65HVD10QDREPPackage_SO:SO-8_3.9x4.9mm_P1.27mmU3
1nRF52810-QFxxPackage_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.66x4.66mm_ThermalViasU2

More from bgerp/ztm_doc

12
  • 2 layers108 × 85.3 mmLamps Type5, the printed circuit board in 3D

    Lamps Type5

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    77 parts
  • 2 layers123 × 83 mmLamps Type5, the printed circuit board in 3D

    Lamps Type5

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    74 parts
  • 2 layers63.5 × 83.8 mmLamls Type3, the printed circuit board in 3D

    Lamls Type3

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    48 parts
  • 2 layers63.5 × 83.8 mmLamls Type4, the printed circuit board in 3D

    Lamls Type4

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    44 parts
  • 2 layers80.3 × 54.9 mmSmartDoor, the printed circuit board in 3D

    SmartDoor

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    41 parts
  • 2 layers90.2 × 61 mmConvertor, the printed circuit board in 3D

    Convertor

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    40 parts
  • 2 layers81.9 × 81.9 mmBlinds, the printed circuit board in 3D

    Blinds

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    24 parts
  • 2 layers109.2 × 53.3 mmPLC Plug, the printed circuit board in 3D

    PLC Plug

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    23 parts
  • 2 layers89.5 × 27.3 mmE Latch, the printed circuit board in 3D

    E Latch

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    23 parts
  • 2 layers88.9 × 53.3 mmLamls Type2, the printed circuit board in 3D

    Lamls Type2

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    23 parts
  • 2 layers43.2 × 68.6 mmE Latch, the printed circuit board in 3D

    E Latch

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    17 parts
  • 2 layers43.2 × 68.6 mmE Latch, the printed circuit board in 3D

    E Latch

    bgerp/ztm_doc

    This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.

    16 parts

Similar boards

  • 2 layers101.6 × 147.3 mmKarabas pro revER, the printed circuit board in 3D

    Karabas pro revER

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    223 parts37MIT
  • 4 layers71.5 × 71.5 mmElixir, the printed circuit board in 3D

    Elixir

    golioth/elixir-hw

    An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!

    249 parts36CERN-OHL-P-2.0
  • 2 layers100 × 100 mmZxevo1010 main, the printed circuit board in 3D

    Zxevo1010 main

    UzixLS/zxevo1010-board

    10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure

    252 parts26
  • 2 layers39.6 × 100 mmSteinerVCF, the printed circuit board in 3D

    SteinerVCF

    marangisto/SteinerVCF

    Steiner VCF Replica

    72 parts5MIT
  • 4 layers101.6 × 147.3 mmKarabas go, the printed circuit board in 3D

    Karabas go

    andykarpov/karabas-go-pcb

    Karabas-Go PCB

    311 parts3
  • 2 layers49.4 × 43.7 mmChaos papagali, the printed circuit board in 3D

    Chaos papagali

    Pakequis/Chaos_papagali

    A annoying device that imitates the vibration of a phone

    41 parts2MIT
  • 2 layers120.1 × 46 mmGeiger EDW, the printed circuit board in 3D

    Geiger EDW

    Sidolux/geiger_counter

    Geiger Counter (STS-5) designed with KiCad

    60 parts1
  • 4 layers81 × 113.2 mmAuralab Workstation Vishal, the printed circuit board in 3D

    Auralab Workstation Vishal

    Vishalbabu-09/Auralab_Workstation

    Advanced 4-layer PCB design featuring split-plane noise isolation (AGND/DGND) and asynchronous dual-core processing. Implements a handheld multi-tool oscilloscope, current tracker, and symmetrical DC power supply.

    81 parts1

Questions

How big is the Blinds PCB?

It measures 60.3 × 36.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Blinds use?

53 parts, built around the SN65HVD10QDREP, 1N4148W and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Blinds KiCad files?

From the bgerp/ztm_doc repository on GitHub, at the commit this page was made from: the board is PCBs/Blinds/Blinds_Type1/Blinds.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Blinds design in my own project?

Its repository states no licence, so its author keeps all rights: ask bgerp before reusing the design.