

Alarm clock (v3)
- Size
- 99.1 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 20
- Pads
- 57
- Tracks, vias
- 129, 15
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 May 2016
- Updated
- 30 Mar 2026
Overview
Touch is an open-source printed circuit board by bfrigon, from the bfrigon/alarm-clock-v3 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 99.1 × 25.4 mm with 21 parts on 20 nets, routed with 129 tracks and 15 vias.
It is built around the AT42QT1070-SSU, LP2981-33DBVTE4 and BSS138. Its parts include 8 resistors, 4 capacitors, 3 switches, 2 ICs and 2 transistors. It belongs with the lEDs and displays and home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3AT42QT1070-SSU
SOIC-14-40℃~+85℃ 1.8V~5.5V 7 Capacitive Touch SOIC-14 Touch Sensors ROHSMicrochip TechnologyTouch SensorsLP2981-33DBVTE4
SOT-23-5-40℃~+125℃ 1 100mA 160uV 16V 200mV@(100mA) 3.3V 600uA 63dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
pcb/daughterboard/README.mdBill of material
Date : 2018-09-19
Doc. ID : CLKV3-SCH-06
Project : Alarm Clock (V3)
Title : Daughterboard
Part # : CLKV3-PC-06
REV. : A
Components : 70| Qty | Ref. | Description | Value | Part # | Footprint |
|---|---|---|---|---|---|
| 1 | J7 | Header - Single Row - 2 Pos | ALARM SW | DF3A-2P-2DSA | conn-header:DF3A-2P-2DSA |
| 1 | J1 | Header - Single Row - 3 Pos | LAMP | DF3A-3P-2DSA | conn-header:DF3A-3P-2DSA |
| 1 | J3 | Header - Single Row - 4 Pos | SPKR | DF3A-4P-2DSA | conn-header:DF3A-4P-2DSA |
| 1 | J2 | Header - Single Row - 8 Pos | DISPLAY | DF3A-8P-2DSA | conn-header:DF3A-8P-2DSA |
| 1 | U2 | Single inverter | - | 74AHC1G04SE-7 | smt-sot:SOT-353 |
| 1 | U3 | Dual 150mA LDO Regulator | - | AP7312-1833W6 | smt-sot:SOT23-6 |
| 1 | Q1 | Single P-Channel MOSFET 20V 10A | NTF6P02 | NTF6P02T3G | smt-sot:SOT-223 |
| 1 | U5 | Dual non-inverting buffer | - | SN74LVC2G34DBV | smt-sot:SOT23-6 |
| 1 | U4 | 2.8W/Ch Stereo Class-D Audio Amplifier | - | TPA2016D2 | smt-qfn:QFN20-EP-4x4 |
| 1 | U1 | MP3/AAC/MIDI Audio Codec | - | VS1053B | smt-qfp:QFP-7-48 |
| 10 | R4, R6, R12-R19 | Resistor | 100k | - | smt:R-0603 |
| 14 | C1-C10, C26-C27, C29-C30 | Capacitor | 100nF | - | smt:C-0603 |
| 3 | R2, R7, R11 | Resistor | 10k | - | smt:R-0603 |
| 2 | C18-C19 | Capacitor | 10nF | - | smt:C-0603 |
| 1 | R8 | Resistor | 10 | - | smt:R-0603 |
| 3 | C11, C14, C16 | Electrolytic capacitor | 10uF 6V3 | - | smt:CPL-0805 |
| 3 | C24-C25, C28 | Capacitor | 10uF | - | smt:C-0805 |
| 1 | R5 | Resistor | 1M | - | smt:R-0603 |
| 4 | C31-C34 | Capacitor | 1nF | - | smt:C-0603 |
| 5 | C15, C20-C23 | Capacitor | 1uF | - | smt:C-0805 |
| 2 | C12-C13 | Capacitor | 20pF | - | smt:C-0603 |
| 2 | R9-R10 | Resistor | 20 | - | smt:R-0603 |
| 2 | R1, R3 | Resistor | 470 | - | smt:R-0603 |
| 1 | C17 | Capacitor | 47nF | - | smt:C-0603 |
| 2 | L1-L2 | Ferrite | - | 2508053007Y0 | smt:FER-0805 |
| 1 | Y1 | Crystal | 12.288 MHz | ECS-122.8-20-3X-EN-TR | crystals:smt-CSM-3X-7x4mm |
| 4 | L3-L6 | Ferrite | - | MPZ1608S221A | smt:FER-0603 |
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | smt:R-0603 | R1, R3, R7, R8 |
| 3 | 470 | smt:R-0603 | R4, R5, R6 |
| 2 | 1uF | smt:C-0805 | C1, C3 |
| 2 | BSS138 | smt-sot:SOT23 | Q1, Q2 |
| 1 | 100k | smt:R-0603 | R2 |
| 1 | 100nF | smt:C-0603 | C2 |
| 1 | 3.3uF | smt:C-0805 | C4 |
| 1 | ALARM | conn-wire-pads:TouchPad-700x600 | SW1 |
| 1 | AT42QT1070 | smt-soic:SOIC14N | U1 |
| 1 | HEADER-1x05 | conn-wire-pads:WP-50mil-1x05 | J1 |
| 1 | LP2981-33DBVT | smt-sot:SOT23-5 | U2 |
| 1 | MENU | conn-wire-pads:TouchPad-700x600 | SW2 |
| 1 | SET | conn-wire-pads:TouchPad-800x600 | SW3 |
The 20 most common of 21 parts.
More from bfrigon/alarm-clock-v3
12- 4 layers99.1 × 91.4 mm

- 2 layers99.1 × 88.9 mm

- 4 layers99.1 × 39.4 mm

- 4 layers67.3 × 39.4 mm

- 2 layers40.6 × 30.5 mm

- 2 layers43.8 × 39.4 mm

- 2 layers99.1 × 19 mm

- 2 layers22.9 × 39.4 mm

- 2 layers11.4 × 29.2 mm

- 2 layers18.4 × 44.5 mm

- 2 layers12.7 × 40.6 mm

- 2 layers21.6 × 24.1 mm

Similar boards
- 2 layers28 × 60 mm

FabRecorder
FabLabValsamoggia/FabRecorder
Library requirements: TMRpcm. See code for other informations.
36 parts - 2 layers203 × 68.5 mm

- 2 layers100 × 21 mm

- 2 layers37.3 × 16.3 mm

- 2 layers67 × 59 mm

Touch panel
whitfijs-jw/Volvo240-DigitalDash
Volvo 240 Digital Dash Project. It's not much, but its honest work.
18 parts72MIT - 2 layers144.3 × 22.4 mm

Touchboard
plan44/pixelboard-hardware
Pixelboard game lounge table - hardware (laser cut plans, schematics, PCBs)
27 parts4 - 2 layers42.3 × 42 mm

PAWPAD
mothdotmonster/random-pcbs
This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.
31 parts - 2 layers110 × 36 mm

Questions
How big is the Touch PCB?
It measures 99.1 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Touch use?
21 parts, built around the AT42QT1070-SSU, LP2981-33DBVTE4 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Touch KiCad files?
From the bfrigon/alarm-clock-v3 repository on GitHub, at the commit this page was made from: the board is pcb/touch/touch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Touch design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).