

Alarm clock (v3)
- Size
- 99.1 × 88.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 122
- Nets
- 50
- Pads
- 360
- Tracks, vias
- 724, 215
- Pours
- 33
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 May 2016
- Updated
- 30 Mar 2026
Overview
Panel is an open-source printed circuit board by bfrigon, from the bfrigon/alarm-clock-v3 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 99.1 × 88.9 mm with 122 parts on 50 nets, routed with 724 tracks and 215 vias.
It is built around the AT42QT1070-SSU, LT1109CS8-12#PBF and TSL25911FN, with the WS2812B, IN-PI554FCH and LP2981-33DBVTE4 among its other parts. Its parts include 28 capacitors, 18 ICs, 16 connectors, 13 resistors and 4 transistors. It belongs with the lEDs and displays and home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
8AT42QT1070-SSU
SOIC-14-40℃~+85℃ 1.8V~5.5V 7 Capacitive Touch SOIC-14 Touch Sensors ROHSMicrochip TechnologyTouch SensorsLT1109CS8-12#PBF
SO-80℃~+70℃@(TA) 1 1.2A 120kHz 12V 5V~20V Boost Boost Built-in Fixed No SO-8 DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersTSL25911FN
DFN-6(2x2.2)-30℃~+70℃ 2.7V~3.6V I2C Light Intensity DFN-6(2x2.2) Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light SensorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedIN-PI554FCH
SMD5050-4PLED Indication - DiscreteInoluxLP2981-33DBVTE4
SOT-23-5-40℃~+125℃ 1 100mA 160uV 16V 200mV@(100mA) 3.3V 600uA 63dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsL102011ML04Q
插件-30℃~+65℃ 28V PC Pin Rectangular Columnar SPDT Through Hole 插件 Slide Switches ROHSC&KSlide Switches
README
pcb/daughterboard/README.mdBill of material
Date : 2018-09-19
Doc. ID : CLKV3-SCH-06
Project : Alarm Clock (V3)
Title : Daughterboard
Part # : CLKV3-PC-06
REV. : A
Components : 70| Qty | Ref. | Description | Value | Part # | Footprint |
|---|---|---|---|---|---|
| 1 | J7 | Header - Single Row - 2 Pos | ALARM SW | DF3A-2P-2DSA | conn-header:DF3A-2P-2DSA |
| 1 | J1 | Header - Single Row - 3 Pos | LAMP | DF3A-3P-2DSA | conn-header:DF3A-3P-2DSA |
| 1 | J3 | Header - Single Row - 4 Pos | SPKR | DF3A-4P-2DSA | conn-header:DF3A-4P-2DSA |
| 1 | J2 | Header - Single Row - 8 Pos | DISPLAY | DF3A-8P-2DSA | conn-header:DF3A-8P-2DSA |
| 1 | U2 | Single inverter | - | 74AHC1G04SE-7 | smt-sot:SOT-353 |
| 1 | U3 | Dual 150mA LDO Regulator | - | AP7312-1833W6 | smt-sot:SOT23-6 |
| 1 | Q1 | Single P-Channel MOSFET 20V 10A | NTF6P02 | NTF6P02T3G | smt-sot:SOT-223 |
| 1 | U5 | Dual non-inverting buffer | - | SN74LVC2G34DBV | smt-sot:SOT23-6 |
| 1 | U4 | 2.8W/Ch Stereo Class-D Audio Amplifier | - | TPA2016D2 | smt-qfn:QFN20-EP-4x4 |
| 1 | U1 | MP3/AAC/MIDI Audio Codec | - | VS1053B | smt-qfp:QFP-7-48 |
| 10 | R4, R6, R12-R19 | Resistor | 100k | - | smt:R-0603 |
| 14 | C1-C10, C26-C27, C29-C30 | Capacitor | 100nF | - | smt:C-0603 |
| 3 | R2, R7, R11 | Resistor | 10k | - | smt:R-0603 |
| 2 | C18-C19 | Capacitor | 10nF | - | smt:C-0603 |
| 1 | R8 | Resistor | 10 | - | smt:R-0603 |
| 3 | C11, C14, C16 | Electrolytic capacitor | 10uF 6V3 | - | smt:CPL-0805 |
| 3 | C24-C25, C28 | Capacitor | 10uF | - | smt:C-0805 |
| 1 | R5 | Resistor | 1M | - | smt:R-0603 |
| 4 | C31-C34 | Capacitor | 1nF | - | smt:C-0603 |
| 5 | C15, C20-C23 | Capacitor | 1uF | - | smt:C-0805 |
| 2 | C12-C13 | Capacitor | 20pF | - | smt:C-0603 |
| 2 | R9-R10 | Resistor | 20 | - | smt:R-0603 |
| 2 | R1, R3 | Resistor | 470 | - | smt:R-0603 |
| 1 | C17 | Capacitor | 47nF | - | smt:C-0603 |
| 2 | L1-L2 | Ferrite | - | 2508053007Y0 | smt:FER-0805 |
| 1 | Y1 | Crystal | 12.288 MHz | ECS-122.8-20-3X-EN-TR | crystals:smt-CSM-3X-7x4mm |
| 4 | L3-L6 | Ferrite | - | MPZ1608S221A | smt:FER-0603 |
Parts
122| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | SMT:C-0603 | C1, C1, C2, C2, C3, C4, C5, C6, C7 |
| 9 | WS2812B | SMT:LED-5050 | U1, U1, U2, U2, U3, U4, U5, U6, U7 |
| 7 | 100nF | smt:C-0603 | C1, C2, C2, C3, C3, C6, C8 |
| 6 | 10k | smt:R-0603 | R1, R2, R3, R3, R7, R8 |
| 4 | 1uF | smt:C-0805 | C1, C1, C3, C9 |
| 4 | BSS138 | smt-sot:SOT23 | Q1, Q1, Q2, Q2 |
| 3 | 470 | smt:R-0603 | R4, R5, R6 |
| 3 | HEADER-1x01 | conn-wire-pads:SolderPad-100x500 | H1, H2, H3 |
| 3 | Hole | Conn-Wire-Pads:Hole-Screw-#2 | H1, H1, H2 |
| 3 | IN-PI554FCH | smt:LED-5050 | U1, U2, U3 |
| 2 | 3.3uF | smt:C-0805 | C4, C10 |
| 2 | 4.7k | smt:R-0603 | R4, R5 |
| 2 | 5V IN | Conn-Wire-Pads:WP-100mil-1x01 | J1, J2 |
| 2 | 5V OUT | Conn-Wire-Pads:WP-100mil-1x01 | J3, J4 |
| 2 | DATA IN | Conn-Wire-Pads:WP-50mil-1x01 | J1, J5 |
| 2 | DATA OUT | Conn-Wire-Pads:WP-50mil-1x01 | J6, J6 |
| 2 | GND IN | Conn-Wire-Pads:WP-100mil-1x01 | J2, J3 |
| 2 | GND OUT | Conn-Wire-Pads:WP-100mil-1x01 | J4, J5 |
| 2 | Hole | conn-wire-pads:Hole-Screw-#4 | H1, H2 |
| 2 | Hole | conn-wire-pads:SM-Standoff-#2 | H1, H2 |
| 2 | LOGO | Symbols:SIGNATURE_SILK | SIGNATURE_SILK, SIGNATURE_SILK |
| 2 | LP2981-33DBVT | smt-sot:SOT23-5 | U2, U4 |
| 1 | 100k | smt:R-0603 | R2 |
| 1 | 10uF | smt:CPL-0805 | C4 |
| 1 | 10uF | SMT:CPL-1206 | C9 |
| 1 | 12V | conn-wire-pads:TEST-POINT-50 | TP1 |
| 1 | 1uF | SMT:CPL-1206 | C8 |
| 1 | 22uF | smt:CPL-2312 | C7 |
| 1 | 3.3V | conn-wire-pads:TEST-POINT-50 | TP3 |
| 1 | 33uH | smt:IND-CD54 | L1 |
| 1 | 4.7uF | smt:CPL-1206 | C2 |
| 1 | 4.7uF | smt:CPL-0805 | C5 |
| 1 | 500k | smt:R-0603 | R1 |
| 1 | ALARM | conn-wire-pads:TouchPad-700x600 | SW1 |
| 1 | AT42QT1070 | smt-soic:SOIC14N | U1 |
| 1 | ER-OLED1602-4W | misc:LCD-ER-OLED1602 | U1 |
| 1 | GND | conn-wire-pads:TEST-POINT-50 | TP2 |
| 1 | HEADER-1x01 | conn-wire-pads:SolderPad-100x300 | H4 |
| 1 | HEADER-1x01 | conn-wire-pads:SolderPad-100x200 | H5 |
| 1 | HEADER-1x03 | conn-wire-pads:WP-75mil-1x03 | J1 |
| 1 | HEADER-1x03 | conn-header:HDR-M-1x03 | J1 |
| 1 | HEADER-1x05 | conn-wire-pads:WP-50mil-1x05 | J1 |
| 1 | HEADER-1x06 | conn-wire-pads:WP-50mil-1x06 | J1 |
| 1 | L102011ML04Q | switches:CK_L102XXXML04 | SW1 |
| 1 | LT1109CS8-12 | smt-soic:SOIC8 | U2 |
| 1 | MBRS120T3 | smt:DO-214-AA | D1 |
| 1 | MENU | conn-wire-pads:TouchPad-700x600 | SW2 |
| 1 | OSHW | Symbols:LOGO-OSHW-100 | LOGO-OSHW-100 |
| 1 | OSHW | Symbols:LOGO-OSHW-150 | LOGO-OSHW-150 |
| 1 | SET | conn-wire-pads:TouchPad-800x600 | SW3 |
| 1 | TSL2591 | smt-dfn:DFN6 | U3 |
The 104 most common of 122 parts.
More from bfrigon/alarm-clock-v3
12- 4 layers99.1 × 91.4 mm

- 4 layers99.1 × 39.4 mm

- 4 layers67.3 × 39.4 mm

- 2 layers40.6 × 30.5 mm

- 2 layers43.8 × 39.4 mm

- 2 layers99.1 × 19 mm

- 2 layers22.9 × 39.4 mm

- 2 layers99.1 × 25.4 mm

- 2 layers11.4 × 29.2 mm

- 2 layers18.4 × 44.5 mm

- 2 layers12.7 × 40.6 mm

- 2 layers21.6 × 24.1 mm

Similar boards
- 2 layers28 × 60 mm

FabRecorder
FabLabValsamoggia/FabRecorder
Library requirements: TMRpcm. See code for other informations.
36 parts - 2 layers59 × 83 mm

- 2 layers203 × 68.5 mm

- 2 layers100 × 21 mm

- 2 layers37.3 × 16.3 mm

- 2 layers67 × 59 mm

Touch panel
whitfijs-jw/Volvo240-DigitalDash
Volvo 240 Digital Dash Project. It's not much, but its honest work.
18 parts72MIT - 2 layers144.3 × 22.4 mm

Touchboard
plan44/pixelboard-hardware
Pixelboard game lounge table - hardware (laser cut plans, schematics, PCBs)
27 parts4 - 2 layers42.3 × 42 mm

PAWPAD
mothdotmonster/random-pcbs
This board is for an NES controller that would use Cherry MX keyboard buttons. I will probably get this made and design an enclosure for it some day.
31 parts
Questions
How big is the Panel PCB?
It measures 99.1 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
122 parts, built around the AT42QT1070-SSU, LT1109CS8-12#PBF, TSL25911FN and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the bfrigon/alarm-clock-v3 repository on GitHub, at the commit this page was made from: the board is fab-files/pcb-panels/2-layer-panel/panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).