4 layers31.6 × 84.1 mm
MCL68
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
13 parts534
4 layers40.3 × 27.8 mm
Xmos uconn1
bfarago/xmos_uconn1_slice1Adapter board for xmos jtag and xlink slice to xsys and CMOD and PMOD.
- Size
- 40.3 × 27.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 35
- Pads
- 132
- Tracks, vias
- 787, 51
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Jun 2017
- Updated
- 7 Jun 2017
Overview
Xmos uconn1 is an open-source printed circuit board by bfarago, from the bfarago/xmos_uconn1_slice repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 40.3 × 27.8 mm with 13 parts on 35 nets, routed with 787 tracks and 51 vias.
Its parts include 7 connectors, 4 capacitors and 1 switch. It belongs with the interfaces and adapters boards of this library.
README
README.mdxmos_uconn1_slice
Adapter board for xmos jtag and xlink slice to xsys and CMOD and PMOD.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100N | Capacitors_SMD:C_0603_HandSoldering | C2, C3 |
| 2 | 2u2 | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Hand | C1, C4 |
| 2 | CONN_02X06 | Pin_Headers:Pin_Header_Straight_2x06_Pitch2.54mm | J4, J5 |
| 1 | CONN_02X10 | Socket_Strips:Socket_Strip_Angled_2x10_Pitch2.54mm | J6 |
| 1 | CONN_PWR_B | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | CONN_PWR_C | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | CONN_PWR_D | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | CONN_UART | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J7 |
| 1 | SlicePcbCon | Connect:PCI-EXPRESS | S1 |
| 1 | nc | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm | TP1 |
Similar boards
- 4 layers33 × 32 mm
Doorman slot programmer
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
13 parts252GPL-3.0 - 4 layers25 × 20.5 mm
Refclk breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
13 parts205 - 4 layers59 × 20 mm
- 4 layers62 × 10 mm
Pc healthypi move program adapter v7
Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move
13 parts160MIT - 4 layers88.9 × 19.2 mm
- 4 layers14 × 23.2 mm
Qspimux2
felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests
13 parts57CC-BY-SA-4.0 - 4 layers18 × 16.5 mm
UDB
Unified-Daughterboard/UDB-C-EZM
For more details on the Unified Daughterboard project, see the main website.
13 parts45MIT
Questions
How big is the Xmos uconn1 PCB?
It measures 40.3 × 27.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Xmos uconn1 use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xmos uconn1 KiCad files?
From the bfarago/xmos_uconn1_slice repository on GitHub, at the commit this page was made from: the board is kicad/xmos_uconn1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xmos uconn1 design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).