2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers92.3 × 68 mm
Smogly1
bfaliszek/Smogly-PCB5PCB board for Smogly sensor [ESP8266/ESP32]
- Size
- 92.3 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 15
- Pads
- 69
- Tracks, vias
- 179, 54
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Apr 2021
- Updated
- 7 May 2023
Overview
Smogly1 is an open-source printed circuit board by bfaliszek, from the bfaliszek/Smogly-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 92.3 × 68 mm with 10 parts on 15 nets, routed with 179 tracks and 54 vias.
It is built around the BME280. It belongs with the ESP32 and ESP8266 boards of this library.
Main components
1README
README.mdParts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 5/3.3/GND | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | BME280 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | D5/6/7/8 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | DeepSleep | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | NodeMCU A0-VIN | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J10 |
| 1 | NodeMCU D0-3.3V | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J11 |
| 1 | PMS7003_Conn | Connector_PinSocket_1.27mm:PinSocket_2x05_P1.27mm_Vertical | J9 |
| 1 | PMSx003 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | VCC IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | microUSB | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
Questions
How big is the Smogly1 PCB?
It measures 92.3 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Smogly1 use?
10 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smogly1 KiCad files?
From the bfaliszek/Smogly-PCB repository on GitHub, at the commit this page was made from: the board is Smogly1.kicad_pcb and its schematic Smogly1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smogly1 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers38.6 × 39.5 mm
- 4 layers35.1 × 76.3 mm
Tiny4FSK
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker
90 parts96CERN-OHL-W-2.0 - 2 layers29.8 × 33.7 mm
- 2 layers136 × 100 mm
ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 4 layers36.6 × 60.3 mm
StratoSoar MK3.0
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
85 parts43 - 2 layers23 × 50 mm
- 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37