Skip to the content
2 layers160.8 × 113.5 mmNoria, the printed circuit board in 3D

Kyria-based split keyboard layout PCB

Size
160.8 × 113.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
95
Nets
76
Pads
889
Tracks, vias
1,737, 238
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
14 Feb 2022
Updated
18 Feb 2022

Overview

Noria is an open-source printed circuit board by bergzand, from the bergzand/Noria repository on GitHub. It is a 2-layer board of 160.8 × 113.5 mm with 95 parts on 76 nets, routed with 1,737 tracks and 238 vias.

It is built around the BY25Q32BSTIG(T), TLV73333PDBV and BAS40-05. Its parts include 30 switches, 13 diodes, 10 connectors, 8 resistors and 6 ICs. It belongs with the keyboards and input boards of this library.

Main components

3

README

README.md

Noria Split Keyboard

The Noria keyboard is a Kyria-based split keyboard. It has 6 colums and 3 rows with a larger thumb cluster. Like the original Kyria it has support for both 2U and dual 1U keys for the thumbs. There are three positions for a rotary encoder of which one can be used at a time

The PCB can be flipped and used for both the left and right variant.

The PCB has space for a SPI NOR flash chip that can be used for user configuration settings

Design gotchas

  • When using a rotary encoder: The pads for the chassis pins of the rotary encoder overlap with the pins for the push button. When using a rotary encoder with a push button the chassis pads must be manually detached (a simple knife will do) from both sides of the PCB.

  • The microcontroller module and the SPI NOR flash must be on the same side of the PCB

  • To use the reset pin, the User Information Configuration Register must be configured to pin 0.18 of the microntroller.

  • The rotary encoder pins are connected to the NFC antenna pins of the microcontroller. As these pins are protected by default for NFC operations and will not function as rotary encoder pins. These protections must be disabled in the NFCPINS registers of the User Information Configuration Register.

Parts

95
QtyValueFootprintReferences
25SW_PUSHlib:MX_ALPS_PG1350_noLedSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +9
13BAS40-05lib:SOT-23_mirrorD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13
8SolderJumper_2_Openkicad-footprints:JumperJP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10
5MountingHoleMountingHole:MountingHole_3.5mm_Pad_ViaH3, H4, H5, H6, H7
422Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9, R10, R11, R12
4SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmJP1, JP2, JP11, JP12
3Rotary_EncoderRotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mmSW28, SW29, SW30
2100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2
21ulib:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder_mirrorC3, C4
24.7Klib:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
25.1Klib:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4
2BY25Q32BSTIG(T)Package_SO:SOP-8_3.9x4.9mm_P1.27mmU1, U4
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ6, J8
2Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ1, J4
2MJ-4PP-9kicad-footprints:MJ-4PP-9_1sideJ9, J10
2MountingHolekicad-footprints:spacer_m2H1, H2
2MountingHolekicad-footprints:M2_Hole_THH8, H9
2MountingHolekeyswitches:Stabilizer_MX_2uH10, H11
2SW_PUSHlib:MX_ALPS_reducedSW26, SW27
2TLV73333PDBVPackage_TO_SOT_SMD:SOT-23-5U5, U6
2USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2, J3
2holyiot18010lib:holyiot18010_no_innerU2, U3
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ5
1SW_PUSHkicad-footprints:ResetSWRSW1
1displayConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7

Similar boards

  • 2 layers102.8 × 133 mmKSK-1200A, the printed circuit board in 3D

    KSK-1200A

    starlightk7/OpenKSK

    Repository for Reproduction PCBs for Early 1990's Sony KSK Series Laser Boards, found in systems such as the Sega CD Model 1, 2 & Neo Geo CD Frontloader.

    182 parts12CERN-OHL-S-2.0
  • 2 layers24.8 × 64.9 mmTinyk20, the printed circuit board in 3D

    Tinyk20

    Muriukidavid/tinyk20

    KIcad open hardware design for a tiny NXP Kinetis k20 based debugger and data logger board

    41 parts
  • 4 layers124.5 × 69.2 mmDB1MB, the printed circuit board in 3D

    DB1MB

    stonedDiscord/Automatenplatinen

    Reverse engineerte Hardware aus deutschen Spielautomaten.

    160 parts5BSD-2-Clause
  • 4 layers40 × 40 mmBatteryCharger, the printed circuit board in 3D

    BatteryCharger

    BlockWorker/ModularAudio

    Compact, modular, versatile, hi-fi audio system concept.

    49 parts2
  • 2 layers100 × 100 mmOLDschematic main, the printed circuit board in 3D

    OLDschematic main

    HydrogreenPollub/legacy-pcb-fuel-cell-control-unit

    126 partsMIT
  • 2 layers100 × 80 mmHeizung, the printed circuit board in 3D

    Heizung

    M-o-a-T/moat-hardware

    Schematics and files for MoaT IoT things

    33 parts
  • 2 layers44 × 44 mmTrackball, the printed circuit board in 3D

    Trackball

    jfedor2/rp2040-pmw3360

    RP2040+PMW3360 PCB and code

    40 parts432

Questions

How big is the Noria PCB?

It measures 160.8 × 113.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Noria use?

95 parts, built around the BY25Q32BSTIG(T), TLV73333PDBV and BAS40-05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Noria KiCad files?

From the bergzand/Noria repository on GitHub, at the commit this page was made from: the board is pcb/noria.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Noria design in my own project?

Its repository states no licence, so its author keeps all rights: ask bergzand before reusing the design.