2 layers229.5 × 95.1 mm
Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
55 parts2.1k
2 layers
Mixer
BenRGH/BeurorackModular Synth Docs
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 38
- Pads
- 199
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Oct 2024
- Updated
- 4 Nov 2024
Overview
Mixer is an open-source printed circuit board by BenRGH, from the BenRGH/Beurorack repository on GitHub. It is a 2-layer board with 55 parts on 38 nets.
Its parts include 16 resistors, 11 connectors, 8 capacitors, 2 diodes and 2 transistors. It belongs with the audio and music boards of this library.
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 10 | 100k | PCM_4ms_Potentiometer:Pot_9mm_DShaft | AMP1, AMP2, MIX1.1, MIX1.2, MIX1.3, MIX1.4, MIX2.1, MIX2.2, MIX2.3, MIX2.4 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R15, R16 |
| 4 | 47pF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C5, C6 |
| 2 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C3, C4 |
| 2 | 10uF | PCM_4ms_Capacitor:CP_Radial_P2.5mm | C7, C8 |
| 2 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | LED | PCM_4ms_LED:LED_3mm_C1A2_Polarity_Indicator | SIGNAL1, SIGNAL2 |
| 1 | In 1.1 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J4 |
| 1 | In 1.2 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J3 |
| 1 | In 1.3 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J2 |
| 1 | In 1.4 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J1 |
| 1 | In 2.1 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J7 |
| 1 | In 2.2 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J8 |
| 1 | In 2.3 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J9 |
| 1 | In 2.4 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J10 |
| 1 | Mix Stereo Out | Connector_Audio:Jack_6.35mm_Neutrik_NJ3FD-V_Vertical | J11 |
| 1 | Out 1 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J5 |
| 1 | Out 2 | Connector_Audio:Jack_6.35mm_Neutrik_NJ2FD-V_Vertical | J6 |
| 1 | POWER | PCM_4ms_Connector:Pins_2x05_2.54mm_TH_Europower | H5 |
| 1 | TL074 | PCM_4ms_Package_DIP:DIP-14_W7.62mm | U1 |
The 53 most common of 55 parts.
Questions
What parts does the Mixer use?
55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mixer KiCad files?
From the BenRGH/Beurorack repository on GitHub, at the commit this page was made from: the board is KiCad/Mixer/Mixer.kicad_pcb and its schematic KiCad/Delayylmao/Delayylmao.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mixer design in my own project?
Its repository states no licence, so its author keeps all rights: ask BenRGH before reusing the design.
Similar boards
- 2 layers370 × 11 mm
Daylight Disco XXL
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
55 parts1.1kGPL-3.0 - 2 layers370 × 10 mm
E3NGLEDstick
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
55 parts915 - 2 layers139.3 × 94.8 mm
Flake
lever-tech/flake
An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]
55 parts531CERN-OHL-W-2.0 - 2 layers237.5 × 102.9 mm
Memory
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
55 parts301Unlicense - 2 layers60.6 × 24.1 mm
Blep hackerboard
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
55 parts253GPL-3.0 - 2 layers100 × 96.5 mm
Keyboard ch552-36-lhs
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
55 parts236 - 2 layers190.5 × 85.7 mm
Dissatisfaction30
dcpedit/dissatisfaction30
To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).
55 parts147CC-BY-4.0