

Audio synthesizer running on a Raspberyy Pi Pico device.
- Size
- 96 × 96 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 41
- Pads
- 165
- Tracks, vias
- 147, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Jul 2023
- Updated
- 20 Sep 2024
Overview
Synth is an open-source printed circuit board by benmcevoy, from the benmcevoy/pico-synth repository on GitHub. It is a 2-layer board of 96 × 96 mm with 25 parts on 41 nets, routed with 147 tracks and 12 vias.
Its parts include 9 connectors, 7 resistors, 4 capacitors and 1 IC. It belongs with the audio and music boards and the RP2040 boards of this library.
README
README.mdRaspberry Pi Pico "pico-synth"
Audio synthesizer running on a Raspberyy Pi Pico device.
Currently monophonic with TWO voices.
You WILL need to make a little circuit to drop the PWM voltage from 3.3 volts to about 1.1 volts and filter low/high noise out. Or just risk it and plug in a speaker :)
Here is an example circuit: https://learn.adafruit.com/adding-basic-audio-ouput-to-raspberry-pi-zero/pi-zero-pwm-audio#low-pass-filter-wiring-1960165
I use qjackctl on linux to connect a midi keyboard via my PC. I have not tested it directly with a MIDI controller directly attached (no PC involved), I assume it will work :)
You can find a synth.uf2 file in the build folder which can be copied onto the Pico (hold bootsel while powering on connecting to a PC).
This is about the third C project I have written in the last thirty years, so you know... all bugs are my own.
Pico-SDK
For PIO USB needs to be on develop, at milestone 2.1 release should be back on master.
TinyUSB
pico-sdk ships an older version of tinyusb, so i have pulled latest of that module in order to get the newer usb host code.
Must be >= v0.17
# update sdk
cd pico-sdk
git submodule update --init --recursive
# update tiny-usb
cd pico-sdk/lib/tinyusb
git pull origin masterRun to get the dependances for pio usb.
python3 tools/get_deps.py rp2040midi host code from: https://github.com/rppicomidi/usb_midi_host
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | Conn_02x04_Top_Bottom | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical_SMD | J2, J3, J4, J5 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | AUDIO_OUT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | POWER_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | PWR_LED_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | RESET_BTN_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J9 |
More from benmcevoy/pico-synth
2- 2 layers96 × 96 mm

- 2 layers71.9 × 39.7 mm

Similar boards
- 2 layers159.5 × 30 mm

Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
25 parts3kApache-2.0 - 2 layers113.5 × 95.1 mm

Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
25 parts2.1k - 2 layers75 × 30 mm

- 2 layers58.4 × 114.3 mm

PicoPedal
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
25 parts915 - 2 layers54 × 15 mm

Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT - 2 layers50 × 76 mm

- 2 layers237.5 × 102.9 mm

Storage
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
25 parts301Unlicense - 2 layers43.3 × 21 mm

Questions
How big is the Synth PCB?
It measures 96 × 96 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Synth use?
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Synth KiCad files?
From the benmcevoy/pico-synth repository on GitHub, at the commit this page was made from: the board is kicad/synth/synth.kicad_pcb and its schematic kicad/amp/amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Synth design in my own project?
Its repository states no licence, so its author keeps all rights: ask benmcevoy before reusing the design.