Skip to the content
2 layers71.9 × 39.7 mmAmp, the printed circuit board in 3D

Audio synthesizer running on a Raspberyy Pi Pico device.

Size
71.9 × 39.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
13
Pads
35
Tracks, vias
53, 0
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
9 Jul 2023
Updated
20 Sep 2024

Overview

Amp is an open-source printed circuit board by benmcevoy, from the benmcevoy/pico-synth repository on GitHub. It is a 2-layer board of 71.9 × 39.7 mm with 13 parts on 13 nets, routed with 53 tracks and 0 vias.

It is built around the LM386. Its parts include 7 capacitors, 3 connectors, 1 resistor and 1 IC. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Raspberry Pi Pico "pico-synth"

Audio synthesizer running on a Raspberyy Pi Pico device.

Currently monophonic with TWO voices.

You WILL need to make a little circuit to drop the PWM voltage from 3.3 volts to about 1.1 volts and filter low/high noise out. Or just risk it and plug in a speaker :)

Here is an example circuit: https://learn.adafruit.com/adding-basic-audio-ouput-to-raspberry-pi-zero/pi-zero-pwm-audio#low-pass-filter-wiring-1960165

I use qjackctl on linux to connect a midi keyboard via my PC. I have not tested it directly with a MIDI controller directly attached (no PC involved), I assume it will work :)

You can find a synth.uf2 file in the build folder which can be copied onto the Pico (hold bootsel while powering on connecting to a PC).

This is about the third C project I have written in the last thirty years, so you know... all bugs are my own.

Pico-SDK

For PIO USB needs to be on develop, at milestone 2.1 release should be back on master.

TinyUSB

pico-sdk ships an older version of tinyusb, so i have pulled latest of that module in order to get the newer usb host code.

Must be >= v0.17

text
# update sdk
cd pico-sdk
git submodule update --init --recursive

# update tiny-usb
cd pico-sdk/lib/tinyusb
git pull origin master

Run to get the dependances for pio usb.

text
python3 tools/get_deps.py rp2040

midi host code from: https://github.com/rppicomidi/usb_midi_host

Parts

13
QtyValueFootprintReferences
3270nFCapacitor_THT:C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3C1, C3, C6
3Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2, J3
110 OhmResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC5
110uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC4
1470uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC7
147pFCustom:FKP2_04.5WX06.0HX07.2L_WIMC2
1LM386Custom:N08E_TEXU1
1R_PotentiometerPotentiometer_THT:Potentiometer_Alps_RK09K_Single_VerticalRV1

More from benmcevoy/pico-synth

2
  • 2 layers96 × 96 mmController, the printed circuit board in 3D

    Controller

    benmcevoy/pico-synth

    Audio synthesizer running on a Raspberyy Pi Pico device.

    40 parts1
  • 2 layers96 × 96 mmSynth, the printed circuit board in 3D

    Synth

    benmcevoy/pico-synth

    Audio synthesizer running on a Raspberyy Pi Pico device.

    25 parts1

Similar boards

  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    70 parts137
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers145.3 × 44.5 mmScout, the printed circuit board in 3D

    Scout

    oskitone/scout

    3D-printed, Arduino-compatible, 17-key mono synth. Squeeeee!

    48 parts114
  • 2 layers184 × 114.8 mmPoly555, the printed circuit board in 3D

    Poly555

    oskitone/poly555

    The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

    262 parts93
  • 4 layers223.3 × 120.1 mmISA FPGA v2, the printed circuit board in 3D

    ISA FPGA v2

    robfinch/Cores

    Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

    132 parts78
  • 2 layers101.6 × 137.4 mmOpenxcvr, the printed circuit board in 3D

    Openxcvr

    dawsonjon/OpenXcvr

    Cost Effective HF transceiver based on max1000 FPGA module

    155 parts38MIT
  • 2 layers104.1 × 73.7 mmIsa opl2, the printed circuit board in 3D

    Isa opl2

    skiselev/isa-opl2

    ISA OPL2 Card

    61 parts36

Questions

How big is the Amp PCB?

It measures 71.9 × 39.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Amp use?

13 parts, built around the LM386. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Amp KiCad files?

From the benmcevoy/pico-synth repository on GitHub, at the commit this page was made from: the board is kicad/amp/amp.kicad_pcb and its schematic kicad/amp/amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Amp design in my own project?

Its repository states no licence, so its author keeps all rights: ask benmcevoy before reusing the design.