2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269
2 layers74 × 68 mm
LightReflexGame
benjohnemmett/CircleOfLightHardware & firmware files for a simple PCB light game.
- Size
- 74 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 46
- Pads
- 125
- Tracks, vias
- 226, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Jul 2022
- Updated
- 14 Aug 2022
Overview
LightReflexGame is an open-source printed circuit board by benjohnemmett, from the benjohnemmett/CircleOfLight repository on GitHub, published under the MIT licence. It is a 2-layer board of 74 × 68 mm with 44 parts on 46 nets, routed with 226 tracks and 15 vias.
It is built around the ATMEGA328P-PU. Its parts include 16 resistors, 5 switches, 4 connectors, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdCircleOfLight
Hardware & firmware files for a simple PCB light game.
The hardware files are a PCB design which includes 12 LED lights in a circle and 3 push buttons. It is driven by an atmega328p.
The firmware is a multimode setup with a main menu and up to 12 programs. Currently only 3 programs are implemented: Reflex Game, Countdown Timer, and Hardware Test.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 12 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D-1s1, D-2s1, D-3s1, D-4s1, D-5s1, D-6s1, D-7s1, D-8s1, D-9s1, D-10s1, D-11s1, D-12s1 |
| 3 | R | Resistor_SMD:R_0805_2012Metric | R15, R16, R100 |
| 1 | 10KR | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | ATmega328P-PU | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | C_Polarized | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C1 |
| 1 | Coin_Cell | Battery:BatteryHolder_bje_THT_1x2032 | BT1 |
| 1 | FTDI-232 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | FTDI_VCC_BRIDGE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ISCP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Pwr_Pins | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | PWR_IN |
| 1 | RESET_BTN | Button_Switch_SMD:SW_SPST_FSMSM | SW5 |
| 1 | SW_+ | Button_Switch_SMD:Switch_SPST_SMD_6mm_bje | SW2 |
| 1 | SW_- | Button_Switch_SMD:Switch_SPST_SMD_6mm_bje | SW3 |
| 1 | SW_DPDT_x2 | Button_Switch_SMD:SW_DPDT_MSS22D18_6pin_bje | SW1 |
| 1 | SW_PLAY | Button_Switch_SMD:Switch_SPST_SMD_6mm_bje | SW4 |
The 43 most common of 44 parts.
Questions
How big is the LightReflexGame PCB?
It measures 74 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LightReflexGame use?
44 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LightReflexGame KiCad files?
From the benjohnemmett/CircleOfLight repository on GitHub, at the commit this page was made from: the board is hardware/LightReflexGame.kicad_pcb and its schematic hardware/LightReflexGame.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LightReflexGame design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers76.3 × 122.8 mm
Discipad pcb
coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c
63 parts221GPL-3.0 - 2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers247.6 × 99.2 mm
Romeo pcb
coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C
138 parts148GPL-3.0 - 2 layers90 × 140 mm
Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
70 parts137 - 2 layers238.1 × 375.5 mm
- 2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers145.3 × 44.5 mm
