
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

A bus board for modular synthesizer using JST-XH2.54 connectors
BusBoard is an open-source printed circuit board by benjiaomodular, from the benjiaomodular/EurorackBusBoardJST repository on GitHub. It is a 2-layer board of 155.1 × 27.8 mm with 36 parts on 9 nets, routed with 75 tracks and 151 vias.
Its parts include 25 connectors, 3 resistors and 3 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | Conn_01x06 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J3, J4, J7, J10, J13, J14, J17, J18, J19, J20, J21, J22, J23 |
| 5 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 2 | 1K | benjiaomodular:Resistor_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 1 | 470 | benjiaomodular:Resistor_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5V_IN | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J1 |
| 1 | 5V_OUT | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J2 |
| 1 | CV_IN | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J11 |
| 1 | CV_OUT | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J12 |
| 1 | GATE_IN | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J5 |
| 1 | GATE_OUT | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J6 |
| 1 | GND_IN | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J24 |
| 1 | GND_OUT | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J25 |
| 1 | NEG_12V_IN | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J15 |
| 1 | NEG_12_OUT | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J16 |
| 1 | POS_12V_IN | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J8 |
| 1 | POS_12V_OUT | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J9 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 155.1 × 27.8 mm and has 2 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the benjiaomodular/EurorackBusBoardJST repository on GitHub, at the commit this page was made from: the board is KiCad/BusBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask benjiaomodular before reusing the design.