2 layers40 × 20 mm
2 layers31.8 × 49.5 mm
Euro2breadboard
benjiaomodular/euro2breadboard5A breadboard power adapter for Eurorack and JST connectors
- Size
- 31.8 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 7
- Pads
- 61
- Tracks, vias
- 52, 67
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Feb 2022
- Updated
- 10 May 2022
Overview
Euro2breadboard is an open-source printed circuit board by benjiaomodular, from the benjiaomodular/euro2breadboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.8 × 49.5 mm with 13 parts on 7 nets, routed with 52 tracks and 67 vias.
Its parts include 2 capacitors, 2 resistors, 2 connectors and 1 switch. It belongs with the audio and music and interfaces and adapters boards of this library.
README
README.mdeuro2breadboard
A simple breadboard power adapter for Eurorack module development.
Versions
v1.1 Quick fixes
- Spacing of power rail pins was fixed.
- Updated footprint of toggle switch. Made the drill holes a bit wider.
- Switched the position of the toggle and the LEDs so you can see the lights better.
v1.0 Initial design
- Power rails work great.
- Holes of toggle switch were a bit too tight.
- Spacing of outer pins off with actual breadboard power rails. Can be resolved by soldering while installed on breadboard.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 10k | benjiaomodular:Resistor_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | NEG_12V_PINS1, NEG_12V_PINS2 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | BB_POWER_PINS1, BB_POWER_PINS2 |
| 2 | LED | LED_THT:LED_D3.0mm | -12V, +12V |
| 1 | IDC_BUS | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | JST_BUS | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | SW_DPDT_x2 | benjiaomodular:ToggleSwitch_MTS-202_DPDT | SW1 |
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Euro2breadboard PCB?
It measures 31.8 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Euro2breadboard use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Euro2breadboard KiCad files?
From the benjiaomodular/euro2breadboard repository on GitHub, at the commit this page was made from: the board is KiCAD/euro2breadboard v1.0/euro2breadboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Euro2breadboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).