2 layers
2 layers93.8 × 97.5 mm
Dewpoint pcb
bendecaf/iot-pcbs- Size
- 93.8 × 97.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 30
- Pads
- 72
- Tracks, vias
- 97, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Jun 2022
- Updated
- 31 Mar 2023
Overview
Dewpoint pcb is an open-source printed circuit board by bendecaf, from the bendecaf/iot-pcbs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 93.8 × 97.5 mm with 23 parts on 30 nets, routed with 97 tracks and 15 vias.
Its parts include 7 connectors, 5 resistors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdiot-pcbs
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | , , , , , | ||
| 3 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 1000uF / 25V | Capacitor_THT:CP_Radial_D10.0mm_P7.50mm | C1 |
| 1 | 10nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 3-way On/Auto/Off-Switch | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J7 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Display Connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Power Terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | Relais Connector | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J2 |
| 1 | Reset Button | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | Sensor Inside | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J4 |
| 1 | Sensor Outside | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J3 |
The 21 most common of 23 parts.
More from bendecaf/iot-pcbs
1Similar boards
- 2 layers65 × 56 mm
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the Dewpoint pcb PCB?
It measures 93.8 × 97.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dewpoint pcb use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dewpoint pcb KiCad files?
From the bendecaf/iot-pcbs repository on GitHub, at the commit this page was made from: the board is dewpoint-pcb/dewpoint-pcb.kicad_pcb and its schematic airquality-pcb/airquality-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dewpoint pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).