
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

DIY NAS for 10" Rack Mount
HDD Backplane is an open-source printed circuit board by ben-labs-ltd, from the ben-labs-ltd/DIY-NAS repository on GitHub. It is a 2-layer board of 205 × 133 mm with 22 parts on 10 nets, routed with 123 tracks and 0 vias.
The goal of this project is to make it easier to set up a drive bay in a 10" rack and use it with a nearby PC or a miniPC in the rack.
The HDD Backplane is designed for the cage designed by heron on printables. It screws onto the back using the pre-existing mounting holes and requires a little clearence.
Fantastic, i have included the production files (with JLCPCB in mind) so that you can make this yourself for your home NAS dreams, find them in /HDD Backplane/production and then buy me a coffee ;).
Alternatively, you can buy one from me, assembled and validated for $25+p&p (in GBP equivalent). Please enquire with me at ben@ben-labs.co.uk and I will get one shipped to you (there might be a lead time if there is interest)

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SATA_COMBINED_22 | sata:SATA_Combined | J1, J2, J3, J5, J10, J12 |
| 6 | SATA_DATA_7 | sata:SATA_Data | J7, J7, J7, J7, J7, J7 |
| 2 | Conn_01x04_Pin | xess:xess-MOLEX-8981-04P | J13, J14 |
| 1 | LOGO | ben-labs:ben-labs | G*** |
| 1 | LOGO | ben-labs:open-hardware | G*** |
The 16 most common of 22 parts.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 205 × 133 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ben-labs-ltd/DIY-NAS repository on GitHub, at the commit this page was made from: the board is HDD Backplane/HDD Backplane.kicad_pcb and its schematic HDD Backplane/HDD Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ben-labs-ltd before reusing the design.