4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers133.8 × 177.3 mm
Corne glp
beekeeb/crkbd-glp110A variant of the Corne keyboard for GLP (Gateron Low Profile) key switches
- Size
- 133.8 × 177.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 164
- Nets
- 138
- Pads
- 596
- Tracks, vias
- 1,560, 336
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Oct 2023
- Updated
- 18 Oct 2023
Overview
Corne glp is an open-source printed circuit board by beekeeb, from the beekeeb/crkbd-glp repository on GitHub, published under the MIT licence. It is a 2-layer board of 133.8 × 177.3 mm with 164 parts on 138 nets, routed with 1,560 tracks and 336 vias.
It is built around the WS2812B. Its parts include 96 diodes, 42 switches, 4 connectors and 2 ICs. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdCorne GLP (Gateron Low Profile)
The Corne GLP (Gateron Low Profile) is a variant of the Corne keyboard, originally created by foostan. It supports Gateron low-profile key switches (KS-27 and KS-33). The original Corne firmware can be used with this keyboard.
Photos
Bill of Materials (BOM)
Required
| Name | Count | Remarks |
|---|---|---|
| PCB | 1 set | |
| Top plate | 2 sheets | 1.2mm thick |
| Bottom plate | 2 sheets | |
| OLED cover | 2 sheets | |
| Pro Micro or equivalent | 2 | |
| TRRS jack | 2 | |
| Reset switch | 2 | |
| Diodes | 42 | SMD Only (SOD-123 Package) |
| Gateron Low Profile Hotswap Sockets | 42 | |
| Key switches | 42 | Only compatible with Gateron KS-33 / KS-27 |
| Keycaps | 42 pieces | 1u 40 pcs, 1.5u 2 pcs Keycaps Comparison |
| Spacer M2 5mm | 10 pieces | For Case assembly |
| Spacer M2 9mm | 4 pieces | For OLED cover |
| Screw M2 4mm | 28 screws | |
| Rubber feet | 8 pieces | |
| TRRS (4 poles) cable | 1 | |
| Micro USB or USB-C cable | 1 | Avoid charge-only cables |
Optional
| Name | Count | Remarks |
|---|---|---|
| OLED module | 2 | |
| SK6812MINI-E | 42 | LEDs for Backlight |
| WS2812B | 12 | LEDs for Undergrow |
| Microcontroller/OLED Sockets | 1 | |
| Microcontroller Pins | 48 | Alternative: Diode/Resistor legs |
| OLED Headers | 1 | Soldered to OLED module |
Plates
It is compatible with Corne v3 top and bottom plates.
Ordering Parts
DIY kits / Prebuilt Keyboards are available at https://beekeeb.shop.
External Libraries
More Information
Parts
164| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | D | kbd:D3_SMD_v2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +26 |
| 42 | SW_PUSH | beekeeb-lib:SW_Gateron_LowProfile_HotSwap | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +26 |
| 42 | YS-SK6812MINI-E | kbd:YS-SK6812MINI-E | LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23, LED24, LED25 +26 |
| 14 | Val** | kbd:M2_HOLE_v2 | h1, h3, h4, h5, h6, h7, h8, h9, h10, h11, h12, h13, h14, h15 |
| 12 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED1, LED2, LED3, LED4, LED5, LED6, LED28, LED29, LED30, LED31, LED32, LED33 |
| 4 | LOGO | kbd:corne-logo-horizontal | G***, G***1, G***2, G***3 |
| 2 | MJ-4PP-9 | kbd:MJ-4PP-9_1side | J1, J3 |
| 2 | OLED | kbd:OLED_1side | J2, J4 |
| 2 | ProMicro | kbd:ProMicro_v3 | U1, U2 |
| 2 | SW_PUSH | kbd:ResetSW_1side | RSW1, RSW2 |
Questions
How big is the Corne glp PCB?
It measures 133.8 × 177.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Corne glp use?
164 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Corne glp KiCad files?
From the beekeeb/crkbd-glp repository on GitHub, at the commit this page was made from: the board is pcb/corne-glp.kicad_pcb and its schematic pcb/corne-glp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Corne glp design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
