2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers35.6 × 43.2 mm
Pepe
bcr/PepePepe the odor detector
- Size
- 35.6 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 13
- Pads
- 49
- Tracks, vias
- 62, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170920)
- Created
- 4 Oct 2017
- Updated
- 9 Oct 2017
Overview
Pepe is an open-source printed circuit board by bcr, from the bcr/Pepe repository on GitHub. It is a 2-layer board of 35.6 × 43.2 mm with 14 parts on 13 nets, routed with 62 tracks and 0 vias.
It is built around the MIC7211YM5-TR. Its parts include 5 connectors, 2 capacitors, 2 resistors, 2 ICs and 2 diodes.
Main components
1Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 150 Ω | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | 1µF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | APT7335A-50 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | DBG_OUTPUT | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Left | P5 |
| 1 | DBG_SETPOINT | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Left | P3 |
| 1 | DBG_VOC | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Left | P4 |
| 1 | GREEN | LEDs:LED_0805_HandSoldering | D1 |
| 1 | MIC7211YM5 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | POT | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Left | RV1 |
| 1 | RED | LEDs:LED_0805_HandSoldering | D2 |
| 1 | USB_OTG | Pepe:USB_OTG | P1 |
| 1 | VOC_CONN | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm_SMD_Pin1Left | P2 |
Questions
How big is the Pepe PCB?
It measures 35.6 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pepe use?
14 parts, built around the MIC7211YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pepe KiCad files?
From the bcr/Pepe repository on GitHub, at the commit this page was made from: the board is Pepe.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pepe design in my own project?
Its repository states no licence, so its author keeps all rights: ask bcr before reusing the design.
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
