
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

Primitive/minimalistic optoinput board
Optoinput is an open-source printed circuit board by bcelary, from the bcelary/KICAD_OptoInputMinimal repository on GitHub, published under the MIT licence. It is a 2-layer board of 75.4 × 58.8 mm with 32 parts on 36 nets, routed with 194 tracks and 0 vias.
Its parts include 16 resistors, 8 ICs and 4 connectors.
This repo contains a Kicad project of a very primitive opto-isolated binary input for arduino. It contains 8 inputs. The bill of materials as follows:


| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | 4N25 | Housings_DIP:DIP-6_W7.62mm | U1, U2, U3, U4, U5, U6, U7, U8 |
| 2 | CONN_01X08 | Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_8pol | P1, P2 |
| 1 | CONN_01X02 | Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | P6 |
| 1 | CONN_01X03 | Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_3pol | P3 |
The 28 most common of 32 parts.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 75.4 × 58.8 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bcelary/KICAD_OptoInputMinimal repository on GitHub, at the commit this page was made from: the board is optoinput.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).