Skip to the content
2 layers182.9 × 76.2 mmOptoInputBoard, the printed circuit board in 3D

A PCB design for Optically isolated input board based on 4n25 chip with inversion. The output can be attached to Arduino input pins or any other compatible microprocessor.

Size
182.9 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
149
Nets
111
Pads
443
Tracks, vias
964, 33
Routed
Yes
KiCad
KiCad 3
Created
12 Dec 2014
Updated
15 Dec 2014

Overview

OptoInputBoard is an open-source printed circuit board by bcelary, from the bcelary/KICAD_OptoInputBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 182.9 × 76.2 mm with 149 parts on 111 nets, routed with 964 tracks and 33 vias.

It is built around the 74HC04D. Its parts include 54 resistors, 36 diodes, 21 ICs, 19 switches and 18 capacitors.

Main components

1

README

README.md

OptoInputBoard

A PCB design for Optically isolated input board based on 4n25 chip with inversion. The output can be attached to Arduino input pins or any other compatible microprocessor. Further details about this project available on:

http://racooncircuits.com/opto-isolated-input-board-arduino/

Parts

149
QtyValueFootprintReferences
19CONN_3Pin_Headers:Pin_Header_Straight_1x03K1, K2, K3, K4, K5, K6, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 +3
18100nFCapacitors_ThroughHole:Capacitor6MMDiscRM5C1, C2, C3, C4, C5, C6, C7, C10, C11, C12, C13, C14, C15, C16, C17, C18 +2
1810kResistors_ThroughHole:Resistor_Horizontal_RM10mmR10, R11, R12, R13, R14, R15, R16, R17, R18, R37, R38, R39, R40, R41, R42, R43 +2
181kResistors_ThroughHole:Resistor_Horizontal_RM10mmR19, R20, R21, R22, R23, R24, R25, R26, R27, R46, R47, R48, R49, R50, R51, R52 +2
184N25Sockets_DIP:DIP-6__300U1, U2, U3, U4, U5, U6, U7, U12, U13, U14, U15, U16, U17, U18, U19, U20 +2
184k7Resistors_ThroughHole:Resistor_Horizontal_RM10mmR1, R2, R3, R4, R5, R6, R7, R28, R29, R30, R31, R32, R33, R34, R35, R36 +2
18Fairchild S1MDiodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10D1, D2, D3, D4, D5, D6, D7, D19, D20, D21, D22, D23, D24, D25, D26, D27 +2
18LEDLEDs:LED-3MMD10, D11, D12, D13, D14, D15, D16, D17, D18, D28, D29, D30, D31, D32, D33, D34 +2
374HC04Sockets_DIP:DIP-14__300U10, U11, U21
1CONN_20Pin_Headers:Pin_Header_Straight_1x20P1

Similar boards

  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers47 × 39 mmQrss clock tx, the printed circuit board in 3D

    Qrss clock tx

    swharden/AVR-projects

    A collection of standalone AVR projects written in C

    32 parts184MIT
  • 2 layers312 × 140 mmTsynth2 Rev1.3, the printed circuit board in 3D

    Tsynth2 Rev1.3

    Electrotechnique/TSynth-Teensy4.1

    TSynth for Teensy 4.1

    108 parts182
  • 2 layers138 × 96.9 mmISA Card, the printed circuit board in 3D

    ISA Card

    AkBKukU/CM153-Repro

    A reproduction of the Philips CM-153 LMSI controller

    161 parts145
  • 2 layers304.8 × 165.1 mmComix-35, the printed circuit board in 3D

    Comix-35

    schlae/comix-35

    The COMIX-35 is an improved clone of the COMX-35 1802 home computer

    173 parts138
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers70 × 85 mm1bit CPU, the printed circuit board in 3D

    1bit CPU

    naoto64/1bit-CPU

    1bit CPU using 74HC series logic IC.

    38 parts91MIT

Questions

How big is the OptoInputBoard PCB?

It measures 182.9 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OptoInputBoard use?

149 parts, built around the 74HC04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OptoInputBoard KiCad files?

From the bcelary/KICAD_OptoInputBoard repository on GitHub, at the commit this page was made from: the board is OptoInputBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the OptoInputBoard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).