2 layers98 × 89.1 mm
2 layers109 × 79 mm
Hopper power dist
bbokser/hopper-power-distThe power distribution PCB design for the REx Hopper.
- Size
- 109 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 23
- Pads
- 96
- Tracks, vias
- 58, 2
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Jul 2022
- Updated
- 12 Jun 2023
Overview
Hopper power dist is an open-source printed circuit board by bbokser, from the bbokser/hopper-power-dist repository on GitHub, published under the MIT licence. It is a 2-layer board of 109 × 79 mm with 37 parts on 23 nets, routed with 58 tracks and 2 vias.
It is built around the XT60PW-F, B2B-XH-A(LF)(SN) and XT60PW-M, with the AK3-066C-Y, SF-1206S1000W-2 and SMDJ17A among its other parts. Its parts include 9 connectors, 6 capacitors, 3 resistors, 3 diodes and 2 switches.
Main components
7
XT60PW-F
-Horizontal plug Yellow - Power connector / plug connectorChangzhou Amass ElecPlug
B2B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
XT60PW-M
-Horizontal plug Yellow - Power connector / plug connector ROHSChangzhou Amass ElecPlugAK3-066C-Y
插件-55℃~+125℃ 10uA 120V 3kA@8/20us 6000pF 66V 72V IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS 插件 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
SF-1206S1000W-2
1206-55℃~+125℃ 1.6mm 10A 11.31 3.2mm 32V 50A Surface Mount Fuse 1206 Disposable fuses ROHSBournsDisposable Fuses
SMDJ17A
SMC(DO-214AB)-55℃~+150℃ 108.7A 17V 18.9V 27.6V 2uA 3kW@10/1000us TVS Unidirectional SMC(DO-214AB) ESD and Surge Protection (TVS/ESD) ROHSBrightkingESD And Surge Protection (TVS/ESD)
XT60-F
--、Banana Connector Female Gold Plated Yellow - Power connector / plug connectorChangzhou Amass ElecPlug
README
README.mdpower-dist
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | XT60PW-F | XT60PW-F:AMASS_XT60PW-F | J6, J7, J8, J9 |
| 2 | 1000pF | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 2 | 12μF | SamacSys_Parts:LPS6235123MRC | L1, L2 |
| 2 | B2B-XH-A(LF)(SN) | B2B-XH-A_LF__SN_:JST_B2B-XH-A(LF)(SN) | J3, J4 |
| 2 | XT60PW-M | XT60PW-F:AMASS_XT60PW-M | J1, J2 |
| 1 | 0.22μF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 22kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 290Ω | Resistor_SMD:R_2512_6332Metric | R3 |
| 1 | 2MS6T1B3M2QES | SamacSys_Parts:2MS6T1B3M2QES | S1 |
| 1 | 360Ω | benbokser:AC03000003600JAC00 | R1 |
| 1 | 4.7μF | SamacSys_Parts:CAPC3225X270N | C2 |
| 1 | 4.7μF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 470pF | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | AK3-066C-Y | SamacSys_Parts:AK3066CY | D1 |
| 1 | B- | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1 |
| 1 | C- | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H2 |
| 1 | FT_Power_Switch | benbokser:FT Power Switch | SW1 |
| 1 | JTL6048S15 | SamacSys_Parts:JTL6048S15 | PS1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | REF |
| 1 | SF-1206S1000W-2 | SamacSys_Parts:FUSC3216X123N | F1 |
| 1 | SMDJ17A | SamacSys_Parts:DIOM7959X262N | D2 |
| 1 | XT60-F | XT60PW-F:AMASS_XT60-F | J5 |
The 30 most common of 37 parts.
Similar boards
- 4 layers100 × 70 mm
- 6 layers100 × 100 mm
- 4 layers102.8 × 67 mm
Entegre fc
ErdemA33/stm32f405-flight-controller
Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.
129 parts3 - 4 layers85 × 65 mm
Power Board
AdvikChitre/MSL_Imperial_2023
Repository for Imperial College London Robocup MSL team 2023
175 parts2 - 4 layers65.1 × 77.5 mm
OPEN PHASE
foukouda/OPEN_PHASE
OPEN_PHASE: 3-phase inline current and voltage sensing PCB for BLDC drone motors (OPEN THRUST LAB). 1 mΩ shunts + INA241A2 (enhanced PWM rejection), AD7606C-18 18-bit 1 MSPS simultaneous-sampling ADC, LT8362 + LT3045-1…
125 parts1CERN-OHL-P-2.0 - 4 layers230 × 60 mm
PSU
Thoric16/Power-Supply-Unit
A custom-designed robotics Power Supply Unit (PSU) featuring multi-rail buck regulation, remotely switchable outputs, current monitoring, and a hardware E-Stop loop.
157 parts1 - 4 layers67 × 77.5 mm
ECE148 Mainboard
UCSD-Silberman-Classes-and-Projects/148-winter-2025-final-project-team-11
148-winter-2025-final-project-team-11 created by GitHub Classroom
78 parts1
Questions
How big is the Hopper power dist PCB?
It measures 109 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hopper power dist use?
37 parts, built around the XT60PW-F, B2B-XH-A(LF)(SN), XT60PW-M and AK3-066C-Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hopper power dist KiCad files?
From the bbokser/hopper-power-dist repository on GitHub, at the commit this page was made from: the board is hopper-power-dist.kicad_pcb and its schematic hopper-power-dist.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hopper power dist design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).