
Uv led board pcb
battlecoder/electronics
Hardware projects that you will most likely find described in blog.damnsoft.org

Hardware projects that you will most likely find described in blog.damnsoft.org
Control board is an open-source printed circuit board by battlecoder, from the battlecoder/electronics repository on GitHub. It is a 2-layer board with 23 parts on 24 nets, routed with 323 tracks and 10 vias.
Its parts include 8 switches, 7 resistors and 4 connectors.
Small Hardware projects that you will most likely find described in my blog: blog.damnsoft.org
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6, R7, R8, R9 |
| 4 | 7SEGM | Displays_7-Segment:7SegmentLED_LTS6760_LTS6780 | S1, S2, S3, S4 |
| 4 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | , , , |
| 4 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | SW2, SW3, SW4, SW5 |
| 1 | 7SEG_DIGITS2 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J7 |
| 1 | 7SEG_SEGMENTS2 | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mm | J8 |
| 1 | INPUTS2 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J4 |
| 1 | REED | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J11 |

battlecoder/electronics
Hardware projects that you will most likely find described in blog.damnsoft.org

battlecoder/electronics
Hardware projects that you will most likely find described in blog.damnsoft.org


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards






Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the battlecoder/electronics repository on GitHub, at the commit this page was made from: the board is uv_box/pcbs/control_panel/control_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask battlecoder before reusing the design.