2 layers
2 layers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 12
- Pads
- 34
- Tracks, vias
- 14, 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Dec 2022
- Updated
- 6 Jun 2024
Overview
Xnet is an open-source printed circuit board by bask185, from the bask185/general_schematics repository on GitHub. It is a 2-layer board with 8 parts on 12 nets, routed with 14 tracks and 3 vias.
It is built around the MAX485ED. Its parts include 4 resistors, 2 connectors, 1 capacitor and 1 IC.
Main components
1README
README.mdGeneral schematics and PCB designs
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | custom_kicad_lib_sk:R_0603_smalltext | R401, R402, R403 |
| 2 | RJ12 | custom_kicad_lib_sk:RJ12 | J401, J402 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C402 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R404 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U401 |
More from bask185/general_schematics
10- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers40 × 23.5 mm
- 2 layers
- 2 layers
- 2 layers
Similar boards
- 2 layers63 × 46 mm
Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino
31 parts41MIT - 2 layers150 × 50 mm
- 4 layers96 × 172 mm
- 2 layers60 × 30 mm
Scoring table hardware
GrappleRobotics/JMS
Another alternative field management system for the FIRST Robotics Competition.
30 parts18 - 2 layers68.6 × 53.3 mm
XyloShield
StefanKrupop/XyloShield
Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity
19 parts17 - 2 layers257.1 × 166.2 mm
PiccoloBlack2021 14juillet v8sansMasse
SylvainVanIniitu/Piccolo-4C-Black
Piccolo MIDI stochastic sequencer
102 parts16 - 2 layers65 × 56.5 mm
Pool pi v1.1
ChaseDurand/Pool-Pi
Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.
28 parts14 - 2 layers53 × 68.7 mm
EEC IV Reader
flxkrmr/eec-iv-reader-arduino
Arduino based diagnostics-tool for Fords EEC IV ECUs
39 parts14GPL-3.0
Questions
What parts does the Xnet use?
8 parts, built around the MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xnet KiCad files?
From the bask185/general_schematics repository on GitHub, at the commit this page was made from: the board is Xnet/Xnet.kicad_pcb and its schematic CDU/CDU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xnet design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.