2 layers140 × 105.5 mm
2 layers35.6 × 22.6 mm
PowerSensor
BasilAvad/Power-Sensor-PCB1Desgin PCB for Current and Voltage measurement
- Size
- 35.6 × 22.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 11
- Pads
- 36
- Tracks, vias
- 87, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Dec 2023
- Updated
- 9 Sep 2024
Overview
PowerSensor is an open-source printed circuit board by BasilAvad, from the BasilAvad/Power-Sensor-PCB repository on GitHub. It is a 2-layer board of 35.6 × 22.6 mm with 14 parts on 11 nets, routed with 87 tracks and 7 vias.
It is built around the ACS712ELCTR-20A-T. Its parts include 5 resistors, 4 connectors, 3 capacitors, 1 IC and 1 diode.
Main components
1README
README.mdPower-Sensor-PCB
Desgin PCB for Current and Voltage measurement
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R4 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 200K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 5K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | ACS712ELCTR-20A-T_NRND | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BAT+ | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | BAT- | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Current Sens | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J5 |
Questions
How big is the PowerSensor PCB?
It measures 35.6 × 22.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerSensor use?
14 parts, built around the ACS712ELCTR-20A-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerSensor KiCad files?
From the BasilAvad/Power-Sensor-PCB repository on GitHub, at the commit this page was made from: the board is PowerSensor/PowerSensor/PowerSensor.kicad_pcb and its schematic PowerSensor/PowerSensor/PowerSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerSensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask BasilAvad before reusing the design.
Similar boards
- 4 layers101 × 175 mm
- 2 layers25 × 99 mm
Cremini blade atmega328p
nicklasfrahm/mykilio
Mykilio is the proposal for a new Living Standard with the goal to reimagine infrastructure management and monitoring.
102 parts1MIT - 4 layers90 × 160 mm
- 2 layers82.8 × 41.9 mm
- 4 layers68.6 × 53.3 mm
- 2 layers91.4 × 75.6 mm
Buck converter V6
HakanD1/24v-to-5v-50w-buck-converter-stm32
24V to 5V 50W Digital Controlled Buck Converter Hardware, Software, and Control Design. Features an STM32-based closed-loop PI regulation, 120kHz PWM, custom PCB, and a Nextion HMI display interface.
88 partsMIT - 4 layers
