2 layers75.1 × 80.6 mm
A2600-joystick vizboard
bigbass1997/PICTAS
Low-cost replay device for playing back Tool Assisted Speedruns on real hardware
18 parts9
2 layers50.3 × 46.2 mm
Windpup
barzamin/windpup1doggy of the valley of the wind
- Size
- 50.3 × 46.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 52
- Pads
- 217
- Tracks, vias
- 451, 62
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jul 2021
- Updated
- 6 Aug 2021
Overview
Windpup is an open-source printed circuit board by barzamin, from the barzamin/windpup repository on GitHub. It is a 2-layer board of 50.3 × 46.2 mm with 39 parts on 52 nets, routed with 451 tracks and 62 vias.
It is built around the MAX3237CAI+, TLC59211IN and TLV1117-33DCY, with the TPD2E2U06DRL and ESD9B5.0ST5G among its other parts. Its parts include 14 capacitors, 9 diodes, 5 ICs, 4 resistors and 3 connectors.
Main components
5
MAX3237CAI+
SSOP-28-208mil0℃~+70℃ 1Mbps 1mA 3 3V~5.5V 5 Transceiver Yes ±15kV SSOP-28-208mil RS232 ICs ROHSMaxim Integrated (Analog Devices)RS232 ICs
TLC59211IN
PDIP-20-40℃~+85℃ 200mA 30V 3V~5.5V 8 PDIP-20 LED Drivers ROHSTexas InstrumentsLED DriversTLV1117-33DCY
UncategorisedTexas Instruments
TPD2E2U06DRL
SOT-553-5-40℃~+125℃ 1.5pF 10nA 12.4V 2 5.5A@8/20us 5.5V 6.5V 85W@8/20us ESD IEC 61000-4-2、IEC 61000-4-5 SOT-553-5 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
ESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C10, C11, C12 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C13, C14 |
| 2 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C3, C6 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 0.22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 100u | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | DB25_Female | Connector_Dsub:DSUB-25_Female_EdgeMount_P2.77mm | J3 |
| 1 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D9 |
| 1 | ESP-C3-WROOM-02 | RF_Module:ESP-WROOM-02 | U3 |
| 1 | MAX3237 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | R_Pack08 | Resistor_SMD:R_Cat16-8 | RN1 |
| 1 | SW_SPDT | feet:NidecCopal_CL-SB-12B-xx | SW2 |
| 1 | TLC59211 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U2 |
| 1 | TPD2E2U06 | Package_TO_SOT_SMD:SOT-563 | U5 |
| 1 | USB_C_Receptacle_USB2.0 | feet:USB_C_GCT_USB4085 | J1 |
| 1 | push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | short for 250kbit/s | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
Similar boards
- 2 layers100 × 66.1 mm
PicoWiFiModem
mecparts/PicoWiFiModem
A Pico W based RS232 <-> WiFi modem with Hayes AT style commands and LED indicators
39 parts64GPL-3.0 - 2 layers100 × 66.1 mm
Mecparts RetroWiFiModem RetroWiFiModem
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
35 parts1 - 2 layers55 × 95 mm
- 4 layers71 × 83 mm
- 4 layers45.6 × 45.6 mm
- 2 layers66 × 51.5 mm
WiFi Gate Controller
mikelawrence/WiFi-Gate-Controller
WiFi enabled Gate Controller Addon to US Automatic Gate Opener
91 parts8MIT - 2 layers80 × 90 mm
WiFi Septic Controller
mikelawrence/WiFi-Septic-Controller
WiFi enabled Septic Controller
104 parts8MIT
Questions
How big is the Windpup PCB?
It measures 50.3 × 46.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Windpup use?
39 parts, built around the MAX3237CAI+, TLC59211IN, TLV1117-33DCY and TPD2E2U06DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Windpup KiCad files?
From the barzamin/windpup repository on GitHub, at the commit this page was made from: the board is pcb/windpup/windpup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Windpup design in my own project?
Its repository states no licence, so its author keeps all rights: ask barzamin before reusing the design.