Skip to the content
2 layers37.5 × 25 mmPARK, the printed circuit board in 3D

PART (Purdue Aerial Robotics Team) PDU (power distribution unit) and Pixhawk Carrier KiCad projects and accompanying embedded code

Size
37.5 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
11
Pads
45
Tracks, vias
77, 53
Pours
46
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Sep 2026
Updated
6 Nov 2026

Overview

PARK is an open-source printed circuit board by barron62, from the barron62/PART-Comp-Avionics-26-27 repository on GitHub. It is a 2-layer board of 37.5 × 25 mm with 14 parts on 11 nets, routed with 77 tracks and 53 vias.

Its parts include 6 capacitors, 4 resistors, 2 ICs and 1 connector.

README

README.md

PART-Avionics-26-27

PART (Purdue Aerial Robotics Team) PCBs accompanying embedded code Custom PCBS: PDU (power distribution unit) Pixhawk Carrier Board Battery Bleed Board Sensor Board Thrust Stand Board

Parts

14
QtyValueFootprintReferences
310kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3
31uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C5, C6
210nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C3
2LM555xMPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U2
10-47kPotentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_VerticalRV1
122nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
147kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
1Conn_01x03Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_VerticalJ1

More from barron62/PART-Comp-Avionics-26-27

4
  • 2 layersAiden T Onboarding, the printed circuit board in 3D

    Aiden T Onboarding

    barron62/PART-Comp-Avionics-26-27

    PART (Purdue Aerial Robotics Team) PDU (power distribution unit) and Pixhawk Carrier KiCad projects and accompanying embedded code

    10 parts5
  • 2 layersDerek Seymour Onboarding, the printed circuit board in 3D

    Derek Seymour Onboarding

    barron62/PART-Comp-Avionics-26-27

    PART (Purdue Aerial Robotics Team) PDU (power distribution unit) and Pixhawk Carrier KiCad projects and accompanying embedded code

    9 parts5
  • 2 layers29.5 × 25.5 mmAmir K Onboarding PART, the printed circuit board in 3D

    Amir K Onboarding PART

    barron62/PART-Comp-Avionics-26-27

    PART (Purdue Aerial Robotics Team) PDU (power distribution unit) and Pixhawk Carrier KiCad projects and accompanying embedded code

    6 parts5
  • 2 layers47 × 33.5 mmFranklin Morgan Onboarding, the printed circuit board in 3D

    Franklin Morgan Onboarding

    barron62/PART-Comp-Avionics-26-27

    PART (Purdue Aerial Robotics Team) PDU (power distribution unit) and Pixhawk Carrier KiCad projects and accompanying embedded code

    5 parts5

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the PARK PCB?

It measures 37.5 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PARK use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PARK KiCad files?

From the barron62/PART-Comp-Avionics-26-27 repository on GitHub, at the commit this page was made from: the board is Onboarding/William_Lin_Onboarding/PARK/PARK.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PARK design in my own project?

Its repository states no licence, so its author keeps all rights: ask barron62 before reusing the design.