4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers106.7 × 124.5 mm
LoRA based
BaroqueBrother/PCB-ProofsKiCad PCB Designs
- Size
- 106.7 × 124.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 32
- Pads
- 63
- Tracks, vias
- 102, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Jul 2023
- Updated
- 13 Jul 2023
Overview
LoRA based is an open-source printed circuit board by BaroqueBrother, from the BaroqueBrother/PCB-Proofs repository on GitHub, published under the MIT licence. It is a 2-layer board of 106.7 × 124.5 mm with 13 parts on 32 nets, routed with 102 tracks and 0 vias.
It is built around the WS2812B. Its parts include 5 connectors, 1 resistor, 1 diode and 1 switch. It belongs with the radio and wireless boards of this library.
Main components
1README
README.mdPCB-Proofs
KiCad PCB Designs
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A1 |
| 1 | BME | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | Lora | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | OLED_B | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | On/Off switch | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
Questions
How big is the LoRA based PCB?
It measures 106.7 × 124.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LoRA based use?
13 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoRA based KiCad files?
From the BaroqueBrother/PCB-Proofs repository on GitHub, at the commit this page was made from: the board is LoRA_based/LoRA_based.kicad_pcb and its schematic LoRA_based/LoRA_based.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoRA based design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
