4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0
2 layers165 × 65 mm
Flight tracker
BANANA8787/Flight-trackerA flight tracker PCB for Hackclub half-life
- Size
- 165 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 42
- Pads
- 81
- Tracks, vias
- 249, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Oct 2026
- Updated
- 11 Oct 2026
Overview
Flight tracker is an open-source printed circuit board by BANANA8787, from the BANANA8787/Flight-tracker repository on GitHub. It is a 2-layer board of 165 × 65 mm with 7 parts on 42 nets, routed with 249 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 1 IC, 1 connector and 1 switch. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdFlight tracker
A small device on a PCB that displays flights in the nearby area.
Description
A PCB project powered by an ESP32. It uses a ILI9341 screen. It has 4 navigation buttons for moving around the map, up, down, left and right. It also has a rotary encoder by the buttons, so you can zoom in and out. The screen is decently large, and it is able to be used as a touchscreen if I want to add some of that functionality later.
Screenshots
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW_DOWN1, SW_LEFT1, SW_RIGHT1, SW_UP1 |
| 1 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-DevKitC | footprints:ESP32-S3-DevKitC | U2 |
| 1 | RotaryEncoder_Switch_MP | footprints:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
Similar boards
- 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers168.8 × 78.9 mm
Gameboy3
ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!
61 parts8 - 2 layers134.6 × 49.5 mm
- 2 layers90 × 102 mm
- 2 layers119.4 × 98.9 mm
PCB Pami
FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique
25 parts6 - 2 layers76.2 × 40.6 mm
EspressifESP32toExpressAdaptor
dnhutchins/ETC_Express_Reverse_Eng
The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.
3 parts5 - 2 layers
E ink multi sensor
heckler/esphome-device-configs
Configuration definitions for local ESPHome files
11 parts4Apache-2.0
Questions
How big is the Flight tracker PCB?
It measures 165 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flight tracker use?
7 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flight tracker KiCad files?
From the BANANA8787/Flight-tracker repository on GitHub, at the commit this page was made from: the board is PCB/flightTracker.kicad_pcb and its schematic PCB/flightTracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flight tracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask BANANA8787 before reusing the design.