
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)

PCB Design based on the [M]ouse project
C64-Mouse Adapter is an open-source printed circuit board by baldengineer, from the baldengineer/C64_1351_to_PS2_Mouse_PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 42.9 × 16.9 mm with 12 parts on 31 nets, routed with 174 tracks and 45 vias.
It is built around the ATMEGA8-16AU. Its parts include 6 resistors, 3 connectors, 1 capacitor, 1 IC and 1 switch. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
PS/2 Mouse adapter to emulate a Commodore 64 1351 mouse.
The firmware for this project comes from svofski. It is located here: https://github.com/svofski/mouse1351
This PCB design is based on his original EAGLE design, which is available here: http://sensi.org/~svo/%5Bm%5Douse/.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | ATmega8-16AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | Joystick Port | Connector_Dsub:DSUB-9_Female_EdgeMount_P2.77mm | J2 |
| 1 | PS/2 Socket | My Libraries:Connector_Mini-DIN_Female_6Pin_2rows | J3 |
| 1 | RESET | My Libraries:Pushbutton-SMD-TL3305-2-Pad | SW1 |

NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)




SshgurkiratSingh/CCMS_PORTAL
A full-stack smart streetlight fleet management system with real-time monitoring, remote control, and analytics.



borislav968/s3mono
ЭСУД SECU-3 поддерживает использование регуляторов холостого хода на основе шагового привода или электромагнита (ШИМ).
It measures 42.9 × 16.9 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the ATMEGA8-16AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the baldengineer/C64_1351_to_PS2_Mouse_PCB repository on GitHub, at the commit this page was made from: the board is C64-Mouse-Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).