
FMTransceiver
Longing-Ingernot/FMTransceiver
This is an FM radio transmitter and receiver, all in one, built around an ESP32-S3, a KT0803L

🔊 Audio Amplifier PCB (TDA7297 Based) 📌 Overview
TDA7297 PCB is an open-source printed circuit board by baibhavrajacharya69-ctrl, from the baibhavrajacharya69-ctrl/Audioamf repository on GitHub. It is a 2-layer board of 50 × 50 mm with 17 parts on 15 nets, routed with 198 tracks and 0 vias.
It is built around the TDA7297. Its parts include 6 connectors, 5 capacitors, 3 resistors, 1 IC and 1 diode.
🔊 Audio Amplifier PCB (TDA7297 Based) 📌 Overview
This project is a compact stereo audio amplifier PCB based on the TDA7297 IC, designed for delivering high-quality sound with simple circuitry and efficient performance. It is ideal for DIY audio systems, small speakers, and educational electronics projects.
The design focuses on:
Simplicity Reliability Clean audio output Easy assembly 🖼️ 3D Preview
⚙️ Features 🎵 Stereo audio output (2-channel) 🔊 Output power: ~15W + 15W (depending on supply) 🔌 Wide input voltage range (typically 6V–18V DC) 🎚️ On-board volume control (potentiometer) 💡 Power indication LED ❄️ Heat sink support for thermal management 🧩 Screw terminals for easy connections 🧠 Working Principle
The TDA7297 is a dual bridge amplifier IC. It amplifies low-power audio signals from sources like:
Mobile phones Laptops MP3 players
The signal path:
Audio input → coupling capacitors Amplification via TDA7297 Output to speakers
The onboard potentiometer controls the input signal level, thus adjusting volume.
🧾 Components Used TDA7297 Amplifier IC Electrolytic Capacitors Ceramic Capacitors Resistors Potentiometer (Volume Control) LED (Power Indicator) Screw Terminal Blocks Heat Sink 🔌 Connections Power Input Connect DC Supply (6V–18V) to the POWER terminal Audio Input Left Channel (L) Right Channel (R) Ground (GND) Speaker Output Left Speaker Right Speaker 🛠️ PCB Design
The PCB is designed using KiCad and includes:
Compact layout Proper grounding Heat dissipation considerations Easy-to-solder through-hole components
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal | J1, J2, J3 |
| 2 | 220nF | Capacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mm | C2, C3 |
| 2 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | Conn_01x01 | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J5, J6 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C5 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 1K5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C4 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J4 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | Potentiometer_Dual_Separate | Potentiometer_THT:Potentiometer_Alps_RK163_Dual_Horizontal | RV1 |
| 1 | TDA7297 | TDA7297:TO127P2020X500X2100-15 | U1 |

Longing-Ingernot/FMTransceiver
This is an FM radio transmitter and receiver, all in one, built around an ESP32-S3, a KT0803L


jabolos10/Bluetooth_Speaker_PCB
KiCad hardware design for a battery-powered Bluetooth speaker — STM32WB15 BLE SoC, TDA7297 audio amplifier, switching power regulation.



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the TDA7297. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the baibhavrajacharya69-ctrl/Audioamf repository on GitHub, at the commit this page was made from: the board is TDA7297_Audio_Amplifier/TDA7297_Audio_Amplifier_Kicad_PCB/TDA7297_PCB.kicad_pcb and its schematic TDA7297_Audio_Amplifier/TDA7297_Audio_Amplifier_Kicad_PCB/TDA7297_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask baibhavrajacharya69-ctrl before reusing the design.