
PAT9125EL
badjeff/pat9125el-pcb
PixArt PAT9125EL-TKIT / TKMT low power optical tracking sensor breakout board.

PixArt PAT9125EL-TKIT / TKMT low power optical tracking sensor breakout board.
PAT9125EL panelized is an open-source printed circuit board by badjeff, from the badjeff/pat9125el-pcb repository on GitHub. It is a 2-layer board of 25 × 16 mm with 27 parts on 8 nets, routed with 174 tracks and 21 vias.
Its parts include 9 capacitors, 6 resistors, 3 ICs and 3 connectors.
PixArt PAT9125EL-TKIT / TKMT low power optical tracking sensor breakout board.
Figure 1: Size comparing to Seeed XIAO BLE
Online preview avaliable here, powered by KiCanvas.
Figure 2: PCB edgecuts dimension
Figure 3: PCB 3D View - 1.6mm FR4
| Designator | Footprint | Quantity | Value | LCSC Part # |
|---|---|---|---|---|
| C1 | SMD 0402 | 1 | 100nF | |
| C2 | SMD 0402 | 1 | 10uF | |
| C3 | SMD 0402 | 1 | 4.7uF | |
| R1, R2 | SMD 0402 | 1 | 5K | |
| U1 | PAT9125EL | 1 | PAT9125EL-TKIT / TKMT | |
| J1 | 1.27mm Pin header | 1 | 1x6 |
Available under the CERN-OHL-P v2 permissive license.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | PAT9125EL:Breakaway-Holes-0.3mmX8 | , , , , , | |
| 6 | 5K | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R2, R2, R2 |
| 3 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C1, C1 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C2, C2, C2 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3, C3, C3 |
| 3 | Conn_01x06_Socket | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J1, J1, J1 |
| 3 | PAT9125EL | PAT9125EL:PAT9125EL | U1, U1, U1 |

badjeff/pat9125el-pcb
PixArt PAT9125EL-TKIT / TKMT low power optical tracking sensor breakout board.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
It measures 25 × 16 mm and has 2 copper layers, 1.6 mm thick.
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the badjeff/pat9125el-pcb repository on GitHub, at the commit this page was made from: the board is PAT9125EL_panelized.kicad_pcb and its schematic PAT9125EL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask badjeff before reusing the design.