Skip to the content
2 layers42 × 36 mmSurs cable tester, the printed circuit board in 3D

A small PCB to test the type of a 8-pin SUR cable

Size
42 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
16
Pads
40
Tracks, vias
36, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Jan 2026
Updated
29 Jan 2026

Overview

Surs cable tester is an open-source printed circuit board by bablokb, from the bablokb/pcb-surs-cable-tester repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 42 × 36 mm with 8 parts on 16 nets, routed with 36 tracks and 0 vias.

README

Readme.md

SURS Cable Tester

Here are the KiCAD (v7) design-files for the SURS cable tester.

Schematic

Layout

3D-Views

License

CC BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

CC BY-SA 4.0

Parts

8
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
1SURS_1Connector_JST:JST_SUR_BM08B-SURS-TF_1x08-1MP_P0.80mm_VerticalJ1
1SURS_2Connector_JST:JST_SUR_BM08B-SURS-TF_1x08-1MP_P0.80mm_VerticalJ3
1THT_1Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1THT_2Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the Surs cable tester PCB?

It measures 42 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Surs cable tester use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Surs cable tester KiCad files?

From the bablokb/pcb-surs-cable-tester repository on GitHub, at the commit this page was made from: the board is surs-cable-tester.kicad_pcb and its schematic surs-cable-tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Surs cable tester design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).