
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

An I2C-connector shim for the Raspberrry Pi Pico
Pcb pico i2c is an open-source printed circuit board by bablokb, from the bablokb/pcb-pico-i2c repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 13.7 × 20.4 mm with 12 parts on 10 nets, routed with 34 tracks and 0 vias.
Its parts include 6 connectors, 2 resistors and 2 switches. It belongs with the RP2040 boards of this library.
An I2C-connector shim for the Raspberrry Pi Pico
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | R | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 3V3 | user:PinHole_1x01 | J6 |
| 1 | 3V3_EN | user:PinHole_1x01 | J5 |
| 1 | Connector_Pico_I2C | user:Connector_Pico-I2C | J2 |
| 1 | Grove | user:grove_horizontal | J1 |
| 1 | RUN | user:PinHole_1x01 | J4 |
| 1 | SW_Push | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | SW2 |
| 1 | SW_Push | user:SW_PUSH_SLIM_1x4 | SW1 |
| 1 | Stemma QT | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 13.7 × 20.4 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bablokb/pcb-pico-i2c repository on GitHub, at the commit this page was made from: the board is pcb-pico-i2c.kicad/pcb-pico-i2c.kicad_pcb and its schematic pcb-pico-i2c.kicad/pcb-pico-i2c.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).