Skip to the content
2 layers24.1 × 26.7 mmPic12-dev stripboard, the printed circuit board in 3D

Pic12-dev stripboard

bablokb/pcb-pic-devboard

Development board for PIC12/PIC16 microcontrollers

Size
24.1 × 26.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
8
Pads
23
Tracks, vias
26, 8
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Jul 2020
Updated
31 Oct 2021

Overview

Pic12-dev stripboard is an open-source printed circuit board by bablokb, from the bablokb/pcb-pic-devboard repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 24.1 × 26.7 mm with 4 parts on 8 nets, routed with 26 tracks and 8 vias.

Its parts include 2 connectors, 1 capacitor and 1 IC. It belongs with the microcontroller boards boards and the PIC boards of this library.

README

Readme.md

Development board for PIC12/PIC16 microcontrollers

This repository contains the design-files (Kicad) for three PIC12/PIC16 development boards.

PIC-Dev-Board

This is a full sized dev-board, see directory pic-dev-board.kicad:

It supports:

  • a PIC12 or a 20-pin PIC16
  • configurable pullups or LEDs on GP0-GP5
  • two shift-registers with LEDs to output 8-16 bits using two GPs (see project pic-sn74hc595)
  • a LCD1602 attached to the first shift-register (see project pic-hd44780_lcd)
  • ICSP programming
  • all pins broken out to connectors (TRISB/TRISC only available for PIC16)
  • a large prototyping-area

PIC12-Dev-PCB

This is a small dev-board for PIC12 MCUs designed for plugging into a breadboard, see directory pic12-dev-pcb:

It supports:

  • PIC12 in SO-8 package
  • ICSP programming
  • connector for an external SN74HC595-pcb (see project pic-sn74hc595
  • also usable as I2C-connector
  • power-supply using a small micro-USB-connector breakout
  • connector for power-out (should align with the power-rails of the breadboard)
  • a small prototyping area
  • a small switch (optional)
  • two LEDs (optional)

Minimal Stripboard Version

In the directory pic12-dev-stripboard.kicad you find the schema and layout for a minimal stripboard version:

This is a simple solution for plugging a PIC12 into a breadboard.

This version is not meant for ICSP (in-circuit serial programming), since it does not have any components to guard the rest of the circuit during programming.

License

Shield: CC BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

CC BY-SA 4.0

Parts

4
QtyValueFootprintReferences
1100nFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1
1App-ConnConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3
1PGM-ConnConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1PIC12F675-ISNPackage_DIP:DIP-8_W7.62mmU1

More from bablokb/pcb-pic-devboard

3
  • 2 layers100 × 100 mmPic dev board, the printed circuit board in 3D

    Pic dev board

    bablokb/pcb-pic-devboard

    Development board for PIC12/PIC16 microcontrollers

    80 partsCC-BY-SA-4.0
  • 2 layers42.8 × 35 mmPic20-dev pcb, the printed circuit board in 3D

    Pic20-dev pcb

    bablokb/pcb-pic-devboard

    Development board for PIC12/PIC16 microcontrollers

    25 partsCC-BY-SA-4.0
  • 2 layers27.9 × 40.1 mmPic12-dev pcb, the printed circuit board in 3D

    Pic12-dev pcb

    bablokb/pcb-pic-devboard

    Development board for PIC12/PIC16 microcontrollers

    18 partsCC-BY-SA-4.0

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Pic12-dev stripboard PCB?

It measures 24.1 × 26.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pic12-dev stripboard use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pic12-dev stripboard KiCad files?

From the bablokb/pcb-pic-devboard repository on GitHub, at the commit this page was made from: the board is pic12-dev-stripboard.kicad/pic12-dev-stripboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pic12-dev stripboard design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).