
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control

A PCB with a LoRa tranceiver and a SUR Connector
Lora pcb is an open-source printed circuit board by bablokb, from the bablokb/pcb-datalogger-lora-pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 36.5 × 33 mm with 11 parts on 14 nets, routed with 58 tracks and 40 vias.
It is built around the RFM95W-868S2. Its parts include 2 connectors, 1 capacitor and 1 IC. It belongs with the radio and wireless boards of this library.
Here are the KiCAD (v6) design-files for the LoRa-PCB.
This PCB is an integrated solution for a RFM9X-SMD-module and a SURS-connector.



This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 1 | 10µF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Antenna_THT | user:Antenna_THT | AE2 |
| 1 | Antenna_u.FL | user:U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 1 | Conn_SUR | Connector_JST:JST_SUR_BM08B-SURS-TF_1x08-1MP_P0.80mm_Vertical | J1 |
| 1 | Conn_THT | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | LOGO | LOGO | G*** |
| 1 | RFM95W-868S2 | user:HOPERF_RFM9XW_SMD | U1 |

dridri/bcflight
Raspberry Pi based drone flight controller and remote control



cernohorsky/LoRa-Node
Simple LoRa Node based on Arduino Pro mini with RFM95W module and PCB antenna.


ElectronicCats/CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®

pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!

spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
It measures 36.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the RFM95W-868S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bablokb/pcb-datalogger-lora-pcb repository on GitHub, at the commit this page was made from: the board is lora-pcb.kicad_pcb and its schematic lora-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).