2 layers60.2 × 38.1 mm
2 layers26.8 × 41 mm
Gardincontroller
baardkrk/kicad-projects- Size
- 26.8 × 41 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 50
- Pads
- 162
- Tracks, vias
- 174, 22
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Mar 2022
- Updated
- 27 Mar 2022
Overview
Gardincontroller is an open-source printed circuit board by baardkrk, from the baardkrk/kicad-projects repository on GitHub. It is a 2-layer board of 26.8 × 41 mm with 24 parts on 50 nets, routed with 174 tracks and 22 vias.
It is built around the ESP32-S2-MINI-1-N4 and LM1117-3.3. Its parts include 8 resistors, 5 capacitors, 4 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Main components
2
ESP32-S2-MINI-1-N4
SMD-65P-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 310mA 3V~3.6V 63mA ESP32-S2FH4 Chip On-board PCB Antenna Support USB interface UART、SPI、I2C、I2S、USB SMD-65P WiFi Modules ROHSEspressif SystemsWiFi Modules
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 33R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | LED_G1, LED_R1 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_Panasonic_EVQPL_3PL_5PL_PT_A08 | BO_1, EN_1 |
| 1 | 45R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 55R | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J3 |
| 1 | ESP32-S2-MINI-1-N4 | footprints:ESP32-S2-MINI-1-N4 | U1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | LOGO | logo:reindeer_small | G*** |
| 1 | USB_C_Receptacle_USB2.0 | USB-C-Power-tester:TYPE-C-31-M-12 | J2 |
Similar boards
- 2 layers29.1 × 39 mm
- 2 layers28 × 28 mm
ESP32 S2 MINI 1
jenschr/ESP32-workshop-files
Kidad files from my two-day workshop on creating an ESP32 based IoT device from scratch.
23 parts1MIT - 4 layers65 × 30 mm
- 2 layers26.6 × 46.8 mm
Lightcontroller
isosloth/lightcontroller
Diese Software wurde von 2 Schülern der Schule / Bühnentechnik geschrieben und ist unter der Gnu General Public License (Version 3) lizenziert (https://www.gnu.org/licenses/gpl-3.0.en.html)
57 parts2GPL-3.0 - 2 layers93.4 × 60.6 mm
Controller
alexmorten/mini_lolly
Run any kind of static file server in the repo root to run the simulator. For example, you can use the following commands as a server:
75 parts1 - 2 layers31.2 × 45.8 mm
Esp32-homeassistant rf bridge
grimsteel/homeassistant-rf-bridge
MQTT-based Home Assistant RF + IR bridge
47 parts1GPL-3.0 - 2 layers85.1 × 119.9 mm
Questions
How big is the Gardincontroller PCB?
It measures 26.8 × 41 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gardincontroller use?
24 parts, built around the ESP32-S2-MINI-1-N4 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gardincontroller KiCad files?
From the baardkrk/kicad-projects repository on GitHub, at the commit this page was made from: the board is gardincontroller/gardincontroller.kicad_pcb and its schematic gardincontroller/gardincontroller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gardincontroller design in my own project?
Its repository states no licence, so its author keeps all rights: ask baardkrk before reusing the design.