Skip to the content
2 layers69 × 120 mmLoRaKid, the printed circuit board in 3D

This is an IOT project to create hard and software for a kid's mobile phone like device but operation on LoRaWan over TTN.

Size
69 × 120 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
39
Pads
93
Tracks, vias
129, 3
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 May 2024
Updated
19 Oct 2024

Overview

LoRaKid is an open-source printed circuit board by azplanlos, from the azplanlos/LoRaKid_IoT repository on GitHub. It is a 2-layer board of 69 × 120 mm with 21 parts on 39 nets, routed with 129 tracks and 3 vias.

Its parts include 9 switches, 2 resistors, 1 IC, 1 transistor and 1 connector.

README

README.md

LoRaKid

This is an IOT project to create hard and software for a kid's mobile phone like device but operation on LoRaWan over TTN.

CURRENTLY THIS IS WORK IN PROGRESS

Image creation

Bitmaps can be created here: https://javl.github.io/image2cpp/

Settings are:

Parts

21
QtyValueFootprintReferences
9SW_PushButton_Switch_SMD:SW_SPST_Omron_B3FS-100xPSW1_ON_OFF1, SW2_LEFT1, SW3_RIGHT1, SW4, SW5, SW6, SW7, SW8, SW9
4MountingHole_2.2mm_M2MountingHole:MountingHole_2.2mm_M2REF1, REF2, REF3, REF4
14,7 kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2
1470Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1Conn_01x02_PinConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalBAT1
1Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalUSB1
1NPNPackage_TO_SOT_THT:TO-92_HandSolderQ1
1~Node:Heltec LoRa 32 V3U1

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the LoRaKid PCB?

It measures 69 × 120 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LoRaKid use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LoRaKid KiCad files?

From the azplanlos/LoRaKid_IoT repository on GitHub, at the commit this page was made from: the board is board/LoRaKid/LoRaKid.kicad_pcb and its schematic board/LoRaKid/LoRaKid.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LoRaKid design in my own project?

Its repository states no licence, so its author keeps all rights: ask azplanlos before reusing the design.