
Kup lulz
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
Symmetricom breakout is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 77 × 56.5 mm with 42 parts on 26 nets, routed with 272 tracks and 202 vias.
It is built around the MUN12AD03-SE, 74LVC1T45W6 and SA22C, with the MI0603J601R-10 and 25SVPF47M among its other parts. Its parts include 11 capacitors, 8 resistors, 5 ICs, 5 connectors and 2 diodes. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C5, C6, C7, C8, C10 |
| 4 | SCREWHOLE | azonenberg_pcb:MECHANICAL_CLEARANCEHOLE_M3 | M1, M2, M3, M4 |
| 3 | SMA | azonenberg_pcb:CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J2, J3, J4 |
| 2 | 22 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C2, C3 |
| 2 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C9, C11 |
| 2 | 470 | azonenberg_pcb:EIA_0402_RES_NOSILK | R7, R8 |
| 2 | 49.9 | azonenberg_pcb:EIA_0402_RES_NOSILK | R3, R4 |
| 2 | 74LVC1T45 | azonenberg_pcb:DFN_6_0.5MM_1.6x1.6MM_TI_DPK | U3, U4 |
| 2 | DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R5, R6 |
| 2 | MI0603J601R-10 | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | FB1, FB2 |
| 1 | 174k | azonenberg_pcb:EIA_0402_RES_NOSILK | R1 |
| 1 | 22 uF | azonenberg_pcb:EIA_1812_CAP_NOSILK | C4 |
| 1 | 25SVPF47M | azonenberg_pcb:CAP_AL_6.3MM_SMT | C1 |
| 1 | 27.4k | azonenberg_pcb:EIA_0402_RES_NOSILK | R2 |
| 1 | BARREL_JACK | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J1 |
| 1 | CONN_01X03 | azonenberg_pcb:CONN_HEADER_2.54MM_1x3 | J5 |
| 1 | GREEN | azonenberg_pcb:EIA_0603_LED | D1 |
| 1 | LOGO | w_logo:Logo_silk_polarity_center_5x1.4mm | M8 |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | M7 |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | M5 |
| 1 | LOGO | w_logo:Logo_silk_OSHW_6x6mm | M6 |
| 1 | MIC5353 | azonenberg_pcb:DFN_6_0.5MM_1.6x1.6MM_TI_DPK | U5 |
| 1 | MUN12AD03-SE | azonenberg_pcb:MODULE_CYNTEC_MUN12AD03-SE | U2 |
| 1 | RED | azonenberg_pcb:EIA_0603_LED | D2 |
| 1 | SA22C | azonenberg_pcb:CONN_HEADER_2MM_2x9_SMT | U1 |
| 1 | U.FL | azonenberg_pcb:CONN_U.FL_TE_1909763-1 | TP1 |

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/common-ibc
48-12V 72W intermediate bus converter common to all of my larger FPGA projects

azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch

azonenberg/latentpacket
The LATENTPACKET network infrastructure platform



azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling


geisel-m/NULunabotics
The repository for everything related to NU Lunabotics
It measures 77 × 56.5 mm and has 4 copper layers, 1.6 mm thick.
42 parts, built around the MUN12AD03-SE, 74LVC1T45W6, SA22C and MI0603J601R-10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is symmetricom-breakout/symmetricom-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).