Skip to the content
4 layers28 × 17 mmJtag swd bridge, the printed circuit board in 3D

Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

Size
28 × 17 mm
Copper layers
4
Thickness
1.6 mm
Parts
4
Nets
6
Pads
12
Tracks, vias
14, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Sep 2017
Updated
29 Oct 2026

Overview

Jtag swd bridge is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 28 × 17 mm with 4 parts on 6 nets, routed with 14 tracks and 0 vias.

Its parts include 2 connectors and 1 resistor. It belongs with the interfaces and adapters boards of this library.

Parts

4
QtyValueFootprintReferences
1100azonenberg_pcb:EIA_0402_RES_NOSILKR1
1CONN_01X04azonenberg_pcb:CONN_HEADER_2.54MM_1x4J2
1CONN_01X06azonenberg_pcb:CONN_HEADER_2.54MM_1x6J1
1LOGOazonenberg_pcb:LONGTHING-600DPIG***

More from azonenberg/misc-devboards

12
  • 4 layers154.5 × 137 mmKup lulz, the printed circuit board in 3D

    Kup lulz

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    384 parts17BSD-3-Clause
  • 6 layers90 × 94.5 mmFpga stm32-ifaces, the printed circuit board in 3D

    Fpga stm32-ifaces

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    274 parts17BSD-3-Clause
  • 4 layers108 × 115.5 mmProcess test-0402-reduction, the printed circuit board in 3D

    Process test-0402-reduction

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    206 parts17BSD-3-Clause
  • 4 layers100.5 × 62.5 mmBaset1-media converter, the printed circuit board in 3D

    Baset1-media converter

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    180 parts17BSD-3-Clause
  • 4 layers77 × 71.5 mmKsz9031-eval, the printed circuit board in 3D

    Ksz9031-eval

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    173 parts17BSD-3-Clause
  • 4 layers73 × 88 mmFpga test kintex676-artix484, the printed circuit board in 3D

    Fpga test kintex676-artix484

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    161 parts17BSD-3-Clause
  • 4 layers42 × 157.5 mmQuad relay mux, the printed circuit board in 3D

    Quad relay mux

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    102 parts17BSD-3-Clause
  • 4 layers35 × 73.5 mmLpr rgmii phy, the printed circuit board in 3D

    Lpr rgmii phy

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    86 parts17BSD-3-Clause
  • 4 layers105 × 28.5 mmTragiclaser phy, the printed circuit board in 3D

    Tragiclaser phy

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    83 parts17BSD-3-Clause
  • 4 layers74 × 58 mmLtc3374-test, the printed circuit board in 3D

    Ltc3374-test

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    77 parts17BSD-3-Clause
  • 2 layers66 × 93.5 mmChristmas tree, the printed circuit board in 3D

    Christmas tree

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    65 parts17BSD-3-Clause
  • 4 layers57 × 60 mmT20-l431-carrier, the printed circuit board in 3D

    T20-l431-carrier

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    60 parts17BSD-3-Clause

Similar boards

  • 4 layers33.7 × 12.4 mmDisplay eval short, the printed circuit board in 3D

    Display eval short

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    4 parts4.3kMIT
  • 4 layers78 × 40 mmAdd on template, the printed circuit board in 3D

    Add on template

    dotstartech/wall-panel

    Wall mounted 4 inch touch display panel with CM4 inside

    4 parts445
  • 4 layers48.5 × 16.3 mmCoupler test, the printed circuit board in 3D

    Coupler test

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    4 parts205
  • 4 layers27.5 × 25 mmVna amplifier, the printed circuit board in 3D

    Vna amplifier

    azonenberg/starshipraider

    Open hardware test equipment

    4 parts193BSD-3-Clause
  • 4 layers80 × 40 mmInit file, the printed circuit board in 3D

    Init file

    Hongcheng-Gao/EngiWorld

    Engiworld: What Can Frontier Agents Deliver in Professional Engineering Environments?

    4 parts52MIT
  • 4 layers44.5 × 59.5 mmBreadboard adapter, the printed circuit board in 3D

    Breadboard adapter

    OpenDevicePartnership/pico-de-gallo

    A tool for testing Embedded Rust drivers for discrete I2C/SPI components.

    4 parts21MIT
  • 4 layers22 × 30 mmM.2 usd, the printed circuit board in 3D

    M.2 usd

    martonmiklos/m.2_microsd

    M.2 E key to micro SD adapter CAD files

    4 parts17
  • 4 layers15.2 × 43.8 mmProm, the printed circuit board in 3D

    Prom

    ronnyroy111/inboard386

    Reverse engineered schematics, PCB and logic equations for the Intel 386/PC accelerator

    4 parts16MIT

Questions

How big is the Jtag swd bridge PCB?

It measures 28 × 17 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Jtag swd bridge use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jtag swd bridge KiCad files?

From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is jtag-swd-bridge/jtag-swd-bridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jtag swd bridge design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).